Hi Thanks All
POR worked plus some chpid Toggle On Thu 9 Aug, 2018, 6:14 PM Pommier, Rex, <[email protected]> wrote: > We also just did this literally yesterday! ICC came up disabled. Went > through the same process, plugged the ICC in, loaded the configuration from > the old machine, and then had to do a POR before it would come up enabled. > > One other thing that bit us, we still couldn't get to it from the > network. We had to change the port from 3270 to something else. We chose > 1024 and then everything started working. I guess the possible restriction > is documented at the end of the exception letter but by then my eyes were > bleary and I missed that note. > > Rex > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] On > Behalf Of Michael Babcock > Sent: Thursday, August 09, 2018 5:37 AM > To: [email protected] > Subject: [External] Re: OSA-ICC ports are disabled > > We just did this. Make sure you export your old OSA-ICC config from the > old HMC and import it to the new one. Then use Advanced OSA functions, > card specific functions, and validate and activate. > > Once we had our new cable plugged in and the ICC imported and activated, we > ended up having to do a power on reset to get the card to come active. > > One other thing, I’ve heard there was one report of a ZR1 where OSA’s > wouldn’t work until the OSA cards were reseated by the IBM SSR. > > On Thu, Aug 9, 2018 at 2:27 AM Jake Anderson <[email protected]> > wrote: > > > Hi > > > > Cross posted . > > > > I was able to bring up the z/OS on tht new hardware z14 successfully. > > > > The OSA base 1000t were plugged into the correct port as per the chpid > > mapping output and also the cable was plugged into the correct switch > port > > > > > > Still the status of the OSA shows as DISABLED in HMC. I tried with reset > > too but no luck. > > > > Anything that is missing to be checked ? > > > > Regards > > Jake. > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to [email protected] with the message: INFO IBM-MAIN > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > > > The information contained in this message is confidential, protected from > disclosure and may be legally privileged. If the reader of this message is > not the intended recipient or an employee or agent responsible for > delivering this message to the intended recipient, you are hereby notified > that any disclosure, distribution, copying, or any action taken or action > omitted in reliance on it, is strictly prohibited and may be unlawful. If > you have received this communication in error, please notify us immediately > by replying to this message and destroy the material in its entirety, > whether in electronic or hard copy format. Thank you. > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
