I just re-read your post. No mention of ICC so ignore me! On Thu, Aug 9, 2018 at 5:36 AM Michael Babcock <[email protected]> wrote:
> We just did this. Make sure you export your old OSA-ICC config from the > old HMC and import it to the new one. Then use Advanced OSA functions, > card specific functions, and validate and activate. > > Once we had our new cable plugged in and the ICC imported and activated, > we ended up having to do a power on reset to get the card to come active. > > > One other thing, I’ve heard there was one report of a ZR1 where OSA’s > wouldn’t work until the OSA cards were reseated by the IBM SSR. > > On Thu, Aug 9, 2018 at 2:27 AM Jake Anderson <[email protected]> > wrote: > >> Hi >> >> Cross posted . >> >> I was able to bring up the z/OS on tht new hardware z14 successfully. >> >> The OSA base 1000t were plugged into the correct port as per the chpid >> mapping output and also the cable was plugged into the correct switch port >> >> >> Still the status of the OSA shows as DISABLED in HMC. I tried with reset >> too but no luck. >> >> Anything that is missing to be checked ? >> >> Regards >> Jake. >> >> ---------------------------------------------------------------------- >> For IBM-MAIN subscribe / signoff / archive access instructions, >> send email to [email protected] with the message: INFO IBM-MAIN >> > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
