Hello Terry,
I saw this and was wondering what mean. I have C00-C0F defined as TN3270 sessions. NO CONSOLE if mean definition-wise. I just did a XAUTOLOG ZVSE412 ON C07. Everything worked fine. XAUTOLOG OPER2 ON C00 worked ok too. What level of z/VM are you at? Ed Martin Aultman Health Foundation 330-363-5050 ext 35050 ________________________________ From: The IBM z/VM Operating System [mailto:[email protected]] On Behalf Of Martin, Terry R. (CMS/CTR) (CTR) Sent: Monday, July 20, 2009 10:23 AM To: [email protected] Subject: Re: Operator Console Resending.... Thank You, Terry Martin Lockheed Martin - Information Technology z/OS & z/VM Systems - Performance and Tuning Cell - 443 632-4191 Work - 410 786-0386 [email protected] <mailto:[email protected]> ________________________________ From: Martin, Terry R. (CMS/CTR) (CTR) Sent: Sunday, July 19, 2009 6:50 PM To: [email protected] Subject: Operator Console Hi I have defined a ICC console (36B) I added this address in the System Config as the console and specify it on the LOAD parameter at IPL time. After the IPL operator was logged on to the ICC console without a problem. I decided to logon to Operator HERE at my desk so it took it away from 36B to me. Now I want to XAUTOLG OPERATOR ON 36B. When I try I get the following error message: HCPAUT051E GRAF 036B is not enabled I display the device 36b and it says it is enabled: q 36b GRAF 036B ENABLED Is this happening because I defined it as a console and I cannot XAUTOLOG Operator? Any help would be welcome. Thank You, Terry Martin Lockheed Martin - Information Technology z/OS & z/VM Systems - Performance and Tuning Cell - 443 632-4191 Work - 410 786-0386 [email protected]
