On Monday, 07/20/2009 at 11:14 EDT, "Martin, Terry R. (CMS/CTR) (CTR)" <[email protected]> wrote:
> I have defined a ICC console (36B) I added this address in the System Config as > the console and specify it on the LOAD parameter at IPL time. After the IPL > operator was logged on to the ICC console without a problem. I decided to logon > to Operator HERE at my desk so it took it away from 36B to me. Now I want to > XAUTOLG OPERATOR ON 36B. When I try I get the following error message: > > HCPAUT051E GRAF 036B is not enabled > > I display the device 36b and it says it is enabled: > > q 36b > GRAF 036B ENABLED > > Is this happening because I defined it as a console and I cannot XAUTOLOG > Operator? Any help would be welcome. XAUTOLOG ON will give HCP051E for one of three reasons: - ENABLE has not been issued for the device - The device has an enable pending (i.e. waiting for the device to come online) - The device has an enable/disable in progress QUERY only tells you if you have issued the ENABLE command. Like Marcy, I suspect that the device was in Purgatory for some reason. If the problem is reproducible, then I would open a PMR. I don't think you should have to VARY OFF/ON before you ENABLE -- how rude. Alan Altmark z/VM Development IBM Endicott
