I havn't set this up yet. If you go to Harkens site they have a tool you can use were you can virtually set up what you want and they will tell you tne part numbers. I was going to go with a 6-1 but my local saling shop suggested 4-1 would be enough. He's set up a few of these lately and I trust his advice. Here's the link
http://www.harkencompuspec.com/ On Thu, Jun 11, 2009 at 11:06 AM, Tim Millar <[email protected]>wrote: > > > Brandon, > I've been thinking along those lines. Do you have a photo of your new > setup, or a parts list you could post? > > Thanks; I'm sure this will help Jeff also. > > Tim > 6254 > > > I have the same set-up as you but I haven't had the boat out sailing > yet. Anytime you go through so many turning blocks you add friction to the > system. What you describe does sound excessive though. I decided to get a > 4-1 or 6-1 purchase and just sheet directly from the traveller. Freeing up > my starboard winch and taking the friction out of the system. SHould make it > easier to race and singlehand also. > > Brandon > 5886 > > > > -- Richard "Brandon" Snider 843-616-3124
