My boat's located in Central East Coast of Florida (Indian River Lagoon) which is brackish water that in summer ranges from 70's to 80 degree temps and winters in low 60's.
Been advised by Catalina that a 13 x 9 three blade is suited for the C27 while for a two blade it is the 13 x 10. Is there anyone out there that has used both on their C27? --- In [email protected], "Phil Agur" <pja...@...> wrote: > > Selecting a new prop isn't something you can normally do on the internet. > Water temp and salinity are big factors in proper selection so my first > choice would be a top notch local vendor like Alameda Prop and Machine for > SF Bay. > > > > I'm not much of a fan of three blades, well I'd guess I'd have to say even > fixed two blades don't thrill me. I'm a fan of the Martec Elliptical MKII. I > know what about maneuvering in reverse? Yes I can tell the difference when > the folder is on but it really has no impact other than RPM. The bite is > still there in reverse but at an increased RPM. > > > > How often do you practice turning your boat in her own length? It really > extends your range of control. > > > > Phil Agur > <http://www.catalina27.org/public_pages/profile270.htm> s/v Wing Tip > C270 LE #184 MMSI 366901790 > > > > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of > surfnrg2001 > Sent: Thursday, July 09, 2009 8:21 PM > To: [email protected] > Subject: [IC27A] Correct Propeller for C27 - 3 blade verse 2 blade > > > > > > > > > Curious what propellers most C27 owners are using. I'm thinking of > purchasing a 3 blade 13 x 9 prop to replace the 2 blade that's currently in > use. Don't get much bite with the 2 blade while maneuvering/docking. I know > I'll be sacrificing the speed with less drag of the 2 blade but curious if > anyone else had switched to a 3 blade - and if so, what pitch. I have the > Universal M18 2 cylinder engine in my '86 C27 hull # 6205. > > > > > > [Non-text portions of this message have been removed] >
