I have seen good reviews for these props from the Catalina 30 list. Lew http://mysite.verizon.net/resqp86c/performancepropellers/
-----Original Message----- From: michael richmond <[email protected]> To: [email protected] Sent: Sun, Jul 12, 2009 8:38 pm Subject: Re: [IC27A] Re: Correct Propeller for C27 - 3 blade verse 2 blade i got my campbell sailor from westbynorthwest i believe it was $500 for the prop. "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...man...what a ride!" Michael Richmond -----Original Message----- From: "surfnrg2001" <[email protected]> To: [email protected] Date: Sat, 11 Jul 2009 12:26:07 -0000 Subject: [IC27A] Re: Correct Propeller for C27 - 3 blade verse 2 blade > Hey Mike, I have the M18 2 cylinder Universal with a 2:1 ratio trans > on my 1986 C27. Not sure what size 2 blade I have on there now but I > was able to run my tach up to 3800 rpm (just briefly) so I think it > must be underpitched. Still wanting to go the three blade option. > I'll check out the Campell 3 blade. Where do you purchase them and how > much? Thanks, Kevin > > --- In [email protected], "michael richmond" <michael.richm...@...> > wrote: > > > > my 2 blade was a 13X10 my new 3blade is 12X9 also depends on the > engine > > you have the transmission gear ratio etc... > > > > > > "Life's journey is not to arrive at the grave safely in a well > preserved > > body, but rather to skid in sideways, totally worn out, > > shouting "...man...what a ride!" > > > > Michael Richmond > > > > > > -----Original Message----- > > From: "surfnrg2001" <ke...@...> > > To: [email protected] > > Date: Fri, 10 Jul 2009 12:24:02 -0000 > > Subject: [IC27A] Re: Correct Propeller for C27 - 3 blade verse 2 > blade > > > > > My boat's located in Central East Coast of Florida (Indian River > > > Lagoon) which is brackish water that in summer ranges from 70's to > 80 > > > degree temps and winters in low 60's. > > > > > > Been advised by Catalina that a 13 x 9 three blade is suited for > the > > > C27 while for a two blade it is the 13 x 10. Is there anyone out > there > > > that has used both on their C27? > > > > > > --- In [email protected], "Phil Agur" <pjagur@> wrote: > > > > > > > > Selecting a new prop isn't something you can normally do on the > > > internet. > > > > Water temp and salinity are big factors in proper selection so my > > > first > > > > choice would be a top notch local vendor like Alameda Prop and > > > Machine for > > > > SF Bay. > > > > > > > > > > > > > > > > I'm not much of a fan of three blades, well I'd guess I'd have to > say > > > even > > > > fixed two blades don't thrill me. I'm a fan of the Martec > Elliptical > > > MKII. I > > > > know what about maneuvering in reverse? Yes I can tell the > difference > > > when > > > > the folder is on but it really has no impact other than RPM. The > bite > > > is > > > > still there in reverse but at an increased RPM. > > > > > > > > > > > > > > > > How often do you practice turning your boat in her own length? It > > > really > > > > extends your range of control. > > > > > > > > > > > > > > > > Phil Agur > > > > <http://www.catalina27.org/public_pages/profile270.htm> s/v Wing > Tip > > > > C270 LE #184 MMSI 366901790 > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > From: [email protected] [mailto:[email protected]] On > Behalf > > > Of > > > > surfnrg2001 > > > > Sent: Thursday, July 09, 2009 8:21 PM > > > > To: [email protected] > > > > Subject: [IC27A] Correct Propeller for C27 - 3 blade verse 2 > blade > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Curious what propellers most C27 owners are using. I'm thinking > of > > > > purchasing a 3 blade 13 x 9 prop to replace the 2 blade that's > > > currently in > > > > use. Don't get much bite with the 2 blade while > maneuvering/docking. > > > I know > > > > I'll be sacrificing the speed with less drag of the 2 blade but > > > curious if > > > > anyone else had switched to a 3 blade - and if so, what pitch. I > have > > > the > > > > Universal M18 2 cylinder engine in my '86 C27 hull # 6205. > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed]
