Hi All, I just came back from the boat (beautiful 70 degree day in NY) and confirmed that I am having problems with the engine instrument display. Problems were most noticeable when I turned the blower on and off. Actually, the blower turned itself on and off and the gauges jumped all around until the blower didn't come back on and the instruments stayed fixed on their previous readings, even after shutting it down. Every gauge is affected by the blower switch even if the blower motor doesn't come on. I took a 2 min video with my phone but don't know where to upload it.
I also had difficulty starting it and saw white smoke when it turned over. Finally, as I was motoring around, I noticed a constant vibration and was wondering if that sounds like the shaft is not perfectly straight? Have any of you experienced some or all of what I've described? Thank you (as always), Michael PS What I'd like to hear is that white smoke is what I want to see and the rest is all in my head and everything is fine. Second place would be telling me that if I tighten one or 2 screws, everything will be prefect.
