This does not address your backflow problem but I see that someone has already indicated a solution. As far as setups go, I bought a 1984 C27 in Nov 2006 and the owner had a nice set up on the bilge pumps. He had one Rule 500 GPM automatic pump mounted to small plexiglass plate that sat on the bottom of the bilge. It was his primary. Then he added a seconed pump about a foot or so forward but it was mounted elevated about an inch or two. Then he ran the discharge hose from the second pump up and out a thru hull in the side wall of the cockpit on the battery (port) side. The theory was that all was well if pump # 1 was working but if pump # 1 ever failed, pump # 2 would kick in to save the day, and if it ever did, you would be alerted by the water suddenly flowing into the cockpit floor. Seemed like great insurance.
--- In [email protected], "PaulJ" <jau...@...> wrote: > > I am curious as to the bilge pump setup in other C27s. My 1986 has a Rule > 2000 with a float switch. It seems to do the job, but I have the usual inch > or so of backflow when when the pump shuts off. Does anyone have a better > solution? > Thanks >
