I see. Thanks for clarification! On Thu, Feb 21, 2013 at 7:31 PM, Bruce Ravel <bra...@bnl.gov> wrote:
> On Thursday, February 21, 2013 09:05:51 AM Ivan Stijepovic wrote: > > Just a thought and one question regarding "freeze" option in Athena. > Would > > it be better to set rmax in Athena to some higher value in the first > place, > > e.g. 7, and then use "freeze group" option? The error in Artemis would be > > avoided and one could still use "freeze". Does it sound right? > > Hi Ivan, > > Your suggestion avoids Dev's immediate problem, but introduces two > more problems. The best solution is for me to change the behavior of > Artemis so that it turns off the "freeze" flag when data are imported > from an Athena project file. > > The problems are (1) this just freezes the rmax value to a different > number. One still will want to change that value in Artemis. (2) > Rmax is used to compute Nidp (number if independent points). Set to > 7, Nidp will be computed wrongly, as will all the statistical > parameters. > > B > > > -- > > Bruce Ravel ------------------------------------ bra...@bnl.gov > > National Institute of Standards and Technology > Synchrotron Methods Group at NSLS --- Beamlines U7A, X24A, X23A2 > Building 535A > Upton NY, 11973 > > Homepage: http://xafs.org/BruceRavel > Software: https://github.com/bruceravel > _______________________________________________ > Ifeffit mailing list > Ifeffit@millenia.cars.aps.anl.gov > http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit > -- Best wishes, Dr Ivan Stijepović Department of Materials Engineering Faculty of Technology University of Novi Sad Bul. cara Lazara 1 21000 Novi Sad Serbia tel: +381 21 485 3750 fax: +381 21 450 413 e-mail: ivan.stijepo...@gmail.com
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
