>> We have a tray-loader here that bongs on power up, >> but never gets a display and never changes the power light from >> yellow to green. By swapping parts we've determined it is >> somewhere in the logic board/drive assembly, not the >> monitor/power supply section.
on 8/25/04 3:31 PM, Matthew Cowgill wrote: >I had that problem with my Bondi and it was just a RAM >issue. New RAM added, reset PRAM and CUDA Switch, >problem gone. Interesting. I have swapped the RAM (2 32M chips) but I might also try cleaning contacts and running with just one RAM chip. I have noticed that it recognizes the cmd-opt-p-r to reset the PRAM (gives another bong) even though there is never any display and the power light stays yellow. -- The iMac List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | - Epson Stylus Color 580 Printers - new at $69 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> iMac List info: <http://lowendmac.com/imac/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/imac-list%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
