I enabled IP forwarding to get it working but apparently that only
works for the first hop......which gets it to the second card but
not from there to the router.
No I haven't set any routes in the box. I have read all the
documentation I can find on the net and there is always one or 2
parts that I just don't get or their example setup is somehow
different or more advanced then I need.
I wanted to make this a 2 NIC router/gateway to the internet and
eventually install the firewall software here locally. Right now
I just want to get it working!
Tim
---------- Original Message ----------------------------------
From: Len Conrad <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
Date: Thu, 20 Sep 2001 01:29:41 -0500
>
>>This has cost me about 5 hours of solid work so far and extended
>>my out of town trip by a day at the least. I am stuck out of
>>state until I figure this out so if you have any information that
>>might help me, it would be greatly appreciated!
>
>are you sure you have turned on routing in that box?
>
>have you set any routes within the box?
>
>Len
>
>
>http://MenAndMice.com/DNS-training
>http://BIND8NT.MEIway.com : ISC BIND 8.2.4 for NT4 & W2K
>http://IMGate.MEIway.com : Build free, hi-perf, anti-abuse mail
gateways
>
>
>Please visit http://www.ipswitch.com/support/mailing-lists.html
>to be removed from this list.
>
>An Archive of this list is available at:
>http://www.mail-archive.com/imail_forum%40list.ipswitch.com/
>
________________________________________________________________
Get Your Free Email address @mydamndomain.com or pick
from our list of fun domain names at http://noveltymail.com
_______________________________________________________________
Sent using Novelty Mail the FREE EMAIL SERVICE. Click here http://noveltymail.com to
get your own free email using this or ANY of our fun domain names.
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/imail_forum%40list.ipswitch.com/
