It depends on what ports MindSpring leaves open for you. If they allow POP3 (110) and SMTP (25), then setting your client to do SMTP AUTH should work. Set it up that way, disconnect from the LAN, dialup your MindSpring account and try it. If everything works OK, go with it. If not, let us know what happened and we can go from there.
Todd -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Michael Welch Sent: Wednesday, November 14, 2001 10:29 PM To: [EMAIL PROTECTED] Subject: RE: [IMail Forum] SMTP Relay. What can we do better. Today our host informed us that he is instituting the no relay you all have been mentioning. He also said that was for security reasons to avoid any chance of spoofing and therefore connecting via the IP addresses in a list would be the ONLY way that we could collect our mail. He said that would mean that when I go on the road, I will no longer be able to collect my mail via my Mindspring dialup number, which I keep for traveling purposes. He said we MUST use Imail's web mail when not at our regular computer and at our regular host. But if I am reading this correctly (it is difficult for me to understand), he is wrong. He should turn off all relaying and then our email programs will do SMTP AUTH which means that someone would have to have my email password to send mail via our domain. That would mean that I should still be able to collect my mail via Eudora while logged into other ISPs, including Mindspring while I am on the road. That is, as long as my mail client has the Authentication Allowed box checked. Am I correct? I am no nerd, so please be gentle. Todd Holt wrote at 08:20 PM 11/14/2001 -0600: >There are 2 solutions here that work independently, but in concert. > >1. SMTP AUTH works all of the time. As far as I know, it cannot be turned >off. It is independent of the relay setting. It is independent of the IP >address. And the address can change anytime. All it needs is a connection >to port 25 of the IMail server. The client will send credentials to the >server for authentication on each SMTP session opened (basically, each time >a message is sent). > >2. The relay setting: If you use "No Relay", you can still have clients send >SMTP messages by using SMTP AUTH (remember, it can't be turned off). Using >"Relay for Addresses" is essentially a whitelist of IP addresses that can >send SMTP messages throught the server (relay) without requiring >authentication. Typically, these are machines that run automated processes >that generate email (i.e. not typically your domain controller). These are >also addresses that typically reside "inside" the firewall. This keeps them >from being spoofed. If you choose, you can specify a public IP address >(like a client's server, or perhaps their firewall public address if they >are using NAT), but it may be possible to spoof this address (b/c you have >no control of what goes on out in the big, bad world). > >Summary: By using "Relay for Addresses", you allow a unknown number of >clients with unknown IPs to relay after being authenticated and you allow a >known number (keep this list as small as possible) of machines to relay >without authenticating. Be sure that you trust any machine on the address >list!!! > >Hope this helps. > >Todd > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED]]On Behalf Of IMail Admin at >BC Web >Sent: Wednesday, November 14, 2001 5:04 PM >To: [EMAIL PROTECTED] >Subject: Re: [IMail Forum] SMTP Relay. What can we do better. > > >There are a couple of these messages that bring up a good point that I'm >unsure of: when you use "relay for address," how do you handle clients when >you don't know their IP address? That is, is there a way to make "relay for >address" work for clients that may come through any arbitrary ISP and have >any (unknown) IP address? > >Ben Bednarz > >----- Original Message ----- >From: "John Tolmachoff" <[EMAIL PROTECTED]> >To: <[EMAIL PROTECTED]> >Sent: Wednesday, November 14, 2001 1:42 PM >Subject: RE: [IMail Forum] SMTP Relay. What can we do better. > > >Although not the best way, I am currently using Relay for local host >only, with Declude Hijack running in back ground. It has solved problems >we have had in the past. > >We are unable to use relay for address because some of our clients are >on DSL which uses DHCP. And some of these users are MAC. > >Unless someone has a better idea. > >John Tolmachoff, Network Engineer > >211 E. Imperial Hwy., Suite 106 >Fullerton, CA 92835 >714-578-7999, ext. 104 >[EMAIL PROTECTED] >[EMAIL PROTECTED] >www.reliancesoft.com > > > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED]] On Behalf Of R. Scott Perry >Sent: Wednesday, November 14, 2001 10:04 AM >To: [EMAIL PROTECTED] >Subject: Re: [IMail Forum] SMTP Relay. What can we do better. > > >>Last week, a person was able to relay 300,000 emails through our Imail >>server. Our current relay is setup for USERS only. > >So you were allowing him to send spam. > >>The person was able to relay mail through our system by changing his >computer >>name to a domain name in IMail, and creating an email account on his >computer >>the same as an email account in one of our Imail domains. > >No, it's not nearly that difficult. In their spamware, when asked "What > >address do you want listed as the sender of the E-mail", they just >entered >"[EMAIL PROTECTED]". No changing of computer names, no creating >E-mail >accounts, no hacking involved. > >>Since IMail was setup for RELAY FOR USERS ONLY, everything worked >correctly. > >That's correct. "Relay for users" means that you will let anyone relay >if >they have an account on your server, or are willing to use an E-mail >address on your server. > >>Even if we had setup IMail relay for HOSTS ONLY, the same thing would >have >>occurred. > >Quite true. "Relay for hosts" means that anyone can relay mail through >your server if they have an account on your server, or are willing to >use a >made-up E-mail address on your server. > >> We tried the NO RELAY option, but unfortunately, since the accept.txt > >> file does not work for NO >>RELAY, none of our emails from WhatsUP Gold could be sent, and some of >our >>third party applications like FrontPage etc... cannot use SMTP >>Authentication. > >With "No Mail Relay", you don't use accept.txt -- it means that everyone > >has to use SMTP AUTH. > >"Relay for Addresses" does what you are looking for (although you don't >use >the accept.txt file, you use the button next to "Relay for Addresses" to > >list the "safe" IP addresses. > >>It would be nice if the ACCEPT.TXT file would worked for NO RELAY but >it >>doesn't. > >No. "No mail relay" really means "Only relay for people using SMTP >AUTH". If IMail let certain users bypass it, then it would be "Relay >for >Addresses" (which it already has). > >>I'm a little upset about this because it was pretty simple for this >person >>to do this ... > >The problem is that IMail doesn't make it clear that several of their >anti-relay options don't prevent spammers from using your mail server. >The >"Relay for Users" option isn't designed to stop spammers. > > -Scott >--- >Declude: Anti-virus, Anti-spam and Anti-hijacking solutions for >IMail. http://www.declude.com > > >Please visit http://www.ipswitch.com/support/mailing-lists.html >to be removed from this list. > >An Archive of this list is available at: >http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ > > >Please visit http://www.ipswitch.com/support/mailing-lists.html >to be removed from this list. > >An Archive of this list is available at: >http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ > > > >Please visit http://www.ipswitch.com/support/mailing-lists.html >to be removed from this list. > >An Archive of this list is available at: >http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ > > >Please visit http://www.ipswitch.com/support/mailing-lists.html >to be removed from this list. > >An Archive of this list is available at: >http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ Michael Welch ------------------------ "A truly wise man never plays leapfrog with a unicorn." unknown Michael Welch, [EMAIL PROTECTED] www.homepower.com Managing Editor, Home Power magazine Office Coordinator, Redwood Alliance (Not HP mag numbers) 707-822-7884 fax: 707-822-3481 Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/
