Well.. That works. I had taken an Ip that was listed in Spamcop did and nslookup on it to make sure it returned as listed and it worked correctly. However, in Imail I have Spamcop entered as
bl.spamcop.net Do I have to enter it in Imail as 2.0.0.127.bl.spamcop.net or anything else for that matter? Apparently the way I have it is not working. Messages are filtering through. Regards, Robert Martinez Miami, Florida "Are you the police?... No ma'am, we're sysadmins" -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Tolmachoff (Lists) Sent: Friday, June 20, 2003 9:26 PM To: [EMAIL PROTECTED] Subject: RE: [IMail Forum] SpamCop > What happens if you go to a command prompt (on the IMail server), and > type "ping 2.0.0.127.bl.spamcop.net"? Does it say something like > "host not found" (meaning you can't communicate with Spamcop) or does > it show an IP of 127.0.0.2 (which means that your server can > communicate with Spamcop)? Works for me: Pinging 2.0.0.127.bl.spamcop.net [127.0.0.2] with 32 bytes of data: Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Ping statistics for 127.0.0.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms John Tolmachoff MCSE CSSA Engineer/Consultant eServices For You www.eservicesforyou.com To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html List Archive: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ Knowledge Base/FAQ: http://www.ipswitch.com/support/IMail/ To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html List Archive: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ Knowledge Base/FAQ: http://www.ipswitch.com/support/IMail/
