On Fri, 02 Jun 2017, Manasi Navare <[email protected]> wrote:
> Validate the compliance test link parameters when the compliance
> test dpcd registers are read. Also validate them in compute_config
> before using them since the max values might have been reduced
> due to link training fallback.
>
> Signed-off-by: Manasi Navare <[email protected]>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 29 +++++++++++++----------------
> 1 file changed, 13 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 832786d..cda0f0a 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -1678,12 +1678,15 @@ intel_dp_compute_config(struct intel_encoder *encoder,
> if (intel_dp->compliance.test_type == DP_TEST_LINK_TRAINING) {
> int index;
>
> - index = intel_dp_rate_index(intel_dp->common_rates,
> - intel_dp->num_common_rates,
> -
> intel_dp->compliance.test_link_rate);
> - if (index >= 0)
> + /* Validate the compliance test data */
> + if (intel_dp_link_params_valid(intel_dp,
> intel_dp->compliance.test_link_rate,
> +
> intel_dp->compliance.test_lane_count)) {
> + index = intel_dp_rate_index(intel_dp->common_rates,
> + intel_dp->num_common_rates,
> +
> intel_dp->compliance.test_link_rate);
I think you still need to check index >= 0. intel_dp_link_params_valid
only checks the boundaries, not that the common rates actually contains
the value.
> min_clock = max_clock = index;
> - min_lane_count = max_lane_count =
> intel_dp->compliance.test_lane_count;
> + min_lane_count = max_lane_count =
> intel_dp->compliance.test_lane_count;
> + }
> }
> DRM_DEBUG_KMS("DP link computation with max lane count %i "
> "max bw %d pixel clock %iKHz\n",
> @@ -3961,8 +3964,7 @@ intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8
> *sink_irq_vector)
> static uint8_t intel_dp_autotest_link_training(struct intel_dp *intel_dp)
> {
> int status = 0;
> - int min_lane_count = 1;
> - int link_rate_index, test_link_rate;
> + int test_link_rate;
> uint8_t test_lane_count, test_link_bw;
> /* (DP CTS 1.2)
> * 4.3.1.11
> @@ -3976,10 +3978,6 @@ static uint8_t intel_dp_autotest_link_training(struct
> intel_dp *intel_dp)
> return DP_TEST_NAK;
> }
> test_lane_count &= DP_MAX_LANE_COUNT_MASK;
> - /* Validate the requested lane count */
> - if (test_lane_count < min_lane_count ||
> - test_lane_count > intel_dp->max_link_lane_count)
> - return DP_TEST_NAK;
>
> status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_LINK_RATE,
> &test_link_bw);
> @@ -3987,12 +3985,11 @@ static uint8_t intel_dp_autotest_link_training(struct
> intel_dp *intel_dp)
> DRM_DEBUG_KMS("Link Rate read failed\n");
> return DP_TEST_NAK;
> }
> - /* Validate the requested link rate */
> test_link_rate = drm_dp_bw_code_to_link_rate(test_link_bw);
> - link_rate_index = intel_dp_rate_index(intel_dp->common_rates,
> - intel_dp->num_common_rates,
> - test_link_rate);
> - if (link_rate_index < 0)
> +
> + /* Validate the requested link rate and lane count */
> + if (!intel_dp_link_params_valid(intel_dp, test_link_rate,
> + test_lane_count))
> return DP_TEST_NAK;
The changes here LGTM.
>
> intel_dp->compliance.test_lane_count = test_lane_count;
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
