Jakob Peterhänsel wrote: > On 24/07/2007, at 22.59, Janice Losgar wrote: >> * VLAN is displayed in the Status Window for an interface and can >> also >> be displayed in the network label. > > Nice to see some VLAN data getting into IM! > > It seems, though, that it's only showing the first VLAN, and that is in > 99.9% of the time, vlan 1.. :-(
We're showing the native vlan for the interface, that is, the default vlan for untagged traffic. > Would it be possible to make a vlan list? > > Cisco IOS style would be ok: > > vlan: 1-10,23,25-50 .... Yes, would it be useful to delineate the tagged vlans in parentheses? For example, here's what I'm thinking, where 1 is the native vlan: Vlans: 1 (2-10,23,25-50) [802.1q] In cases, where untagged traffic is disabled, the 1 would change to None. In cases where tagged traffic is disabled or there are no more vlans: Vlans: 1 > Also, would it be possible to show what VLAN mode it's in? Trunk, and if > it's .1Q or legacy.. ? We have the encapsulation type, 802.1 or ISL. So, the status window could look like this: Vlans: 1 (2-10,23,25-50) [802.1q] or Vlans: 1 (2-10,23,25-50) [ISL] What do you think? Regards, Bill Fisher Dartware, LLC ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
