If the dialog box pops up it is not a problem with the hardware or phone setup, but with the app. Please try the pre-compiled HelloIOIO.apk taken from the latest software bundle. Also check the logcat output of the app.
On Mon, May 5, 2014 at 12:02 AM, Brad E <[email protected]> wrote: > The options under "connect as" in "USB computer connection" are grayed out > whilst I have an active USB connection so I'm not able to complete the > fourth step in phiron's method. Even with mtp already on and if I take the > USB in & out to switch between I still can't manage to get my nexus 7 > Android 4.4.2 talking to my IOIO V1 with firmware 5 & simply running the > Hello IOIO from the 5.0 app lib package talking over USB. > > The IOIO is recognized once connected, and an alert prompt asks me once > USB debugging is turn off if I would like to "Open Hello IOOI when this USB > accessory is connected?" and then again when I run the app to "Allow the > app Hello IOIO to access the USB accessory?." But the LED light just does > not. turn. on... :| Tried both digital IO pin 0, and a LED of my own which > I know turns on in pin 13. > > I've tried the USB connection on two different boards, both of which are > able to work fine via bluetooth. > > Any thoughts? > > Brad > > On Tuesday, February 11, 2014 11:54:51 PM UTC-8, tyimofej wrote: >> >> Hello >> >> Following Phirons method, I also managed to connect on Android 4.3.1 via >> USB (firmware 4v). >> MTP PTP ADB USB_STORAGE NONE are possible values of >> persist.sys.usb.config (media device, photo device, adb, usb drive) >> settings somwhere deep in the system. You can read the value by getprop >> persist.sys.usb.config command in the local terminal. >> According to documentation, three should be a ACCESSORY value as well, >> but I never managed to switch it on (setprop persist.sys.usb.config >> ACCESSORY) . >> You must be root to use the setprop command. >> >> Tyimofej >> >> -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
