If the microchip from a V1 IOIO board was soldered onto an OTG IOIO board. Oh, I didn't know you could check the logcat without an active USB connection between computer running eclipse and the android. How is that done?
On Mon, May 5, 2014 at 11:54 PM, Ytai Ben-Tsvi <[email protected]> wrote: > Wait, what? > And logcat... > > > On Mon, May 5, 2014 at 11:44 PM, Brad E <[email protected]> wrote: > >> Agreed regarding the hardware & phone setup. >> >> The app I am using is the HelloIOIO.apk taken from app5.0 on the >> downloads page. Neither that nor the app named "IOIO Script" from the play >> store are working properly. >> >> The IOIO Script app informs me"IOIO not connected" when the button is >> pressed. >> >> Would it matter if a V1 chip was put on an OTG board? / >> >> >> On Mon, May 5, 2014 at 11:00 PM, Ytai Ben-Tsvi <[email protected]> wrote: >> >>> If the dialog box pops up it is not a problem with the hardware or >>> phone setup, but with the app. >>> Please try the pre-compiled HelloIOIO.apk taken from the latest software >>> bundle. Also check the logcat output of the app. >>> >>> >>> On Mon, May 5, 2014 at 12:02 AM, Brad E <[email protected]>wrote: >>> >>>> The options under "connect as" in "USB computer connection" are grayed >>>> out whilst I have an active USB connection so I'm not able to complete the >>>> fourth step in phiron's method. Even with mtp already on and if I take the >>>> USB in & out to switch between I still can't manage to get my nexus 7 >>>> Android 4.4.2 talking to my IOIO V1 with firmware 5 & simply running the >>>> Hello IOIO from the 5.0 app lib package talking over USB. >>>> >>>> The IOIO is recognized once connected, and an alert prompt asks me once >>>> USB debugging is turn off if I would like to "Open Hello IOOI when this USB >>>> accessory is connected?" and then again when I run the app to "Allow the >>>> app Hello IOIO to access the USB accessory?." But the LED light just does >>>> not. turn. on... :| Tried both digital IO pin 0, and a LED of my own which >>>> I know turns on in pin 13. >>>> >>>> I've tried the USB connection on two different boards, both of which >>>> are able to work fine via bluetooth. >>>> >>>> Any thoughts? >>>> >>>> Brad >>>> >>>> On Tuesday, February 11, 2014 11:54:51 PM UTC-8, tyimofej wrote: >>>>> >>>>> Hello >>>>> >>>>> Following Phirons method, I also managed to connect on Android 4.3.1 >>>>> via USB (firmware 4v). >>>>> MTP PTP ADB USB_STORAGE NONE are possible values of >>>>> persist.sys.usb.config (media device, photo device, adb, usb drive) >>>>> settings somwhere deep in the system. You can read the value by getprop >>>>> persist.sys.usb.config command in the local terminal. >>>>> According to documentation, three should be a ACCESSORY value as well, >>>>> but I never managed to switch it on (setprop persist.sys.usb.config >>>>> ACCESSORY) . >>>>> You must be root to use the setprop command. >>>>> >>>>> Tyimofej >>>>> >>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "ioio-users" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>>> To post to this group, send email to [email protected]. >>>> Visit this group at http://groups.google.com/group/ioio-users. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "ioio-users" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/ioio-users/mi6TCoHG9I4/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> >>> To post to this group, send email to [email protected]. >>> Visit this group at http://groups.google.com/group/ioio-users. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "ioio-users" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/ioio-users. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > You received this message because you are subscribed to a topic in the > Google Groups "ioio-users" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/ioio-users/mi6TCoHG9I4/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
