Ah, awesome tip, did not know that, thanks! It was upgraded with IOIO Manager to App-IOIO0500 using "Boot-IOIO0311-App10100400".....oh, wait o_o... would that cause a problem?? *face palms* it seemed to install the v5 firmware just fine.
On Tue, May 6, 2014 at 12:07 AM, Ytai Ben-Tsvi <[email protected]> wrote: > You do need a USB connection typically. You can view it after the IOIO is > unplugged, the log gets retained on the Android. > I wouldn't assume that moving the PIC between the boards should work. What > firmware is it running? There have been some pin changes between the > revisions. > On May 6, 2014 12:01 AM, "Brad E" <[email protected]> wrote: > >> If the microchip from a V1 IOIO board was soldered onto an OTG IOIO board. >> >> Oh, I didn't know you could check the logcat without an active USB >> connection between computer running eclipse and the android. How is that >> done? >> >> >> >> On Mon, May 5, 2014 at 11:54 PM, Ytai Ben-Tsvi <[email protected]> wrote: >> >>> Wait, what? >>> And logcat... >>> >>> >>> On Mon, May 5, 2014 at 11:44 PM, Brad E <[email protected]>wrote: >>> >>>> Agreed regarding the hardware & phone setup. >>>> >>>> The app I am using is the HelloIOIO.apk taken from app5.0 on the >>>> downloads page. Neither that nor the app named "IOIO Script" from the play >>>> store are working properly. >>>> >>>> The IOIO Script app informs me"IOIO not connected" when the button is >>>> pressed. >>>> >>>> Would it matter if a V1 chip was put on an OTG board? / >>>> >>>> >>>> On Mon, May 5, 2014 at 11:00 PM, Ytai Ben-Tsvi <[email protected]>wrote: >>>> >>>>> If the dialog box pops up it is not a problem with the hardware or >>>>> phone setup, but with the app. >>>>> Please try the pre-compiled HelloIOIO.apk taken from the latest >>>>> software bundle. Also check the logcat output of the app. >>>>> >>>>> >>>>> On Mon, May 5, 2014 at 12:02 AM, Brad E <[email protected]>wrote: >>>>> >>>>>> The options under "connect as" in "USB computer connection" are >>>>>> grayed out whilst I have an active USB connection so I'm not able to >>>>>> complete the fourth step in phiron's method. Even with mtp already on and >>>>>> if I take the USB in & out to switch between I still can't manage to get >>>>>> my >>>>>> nexus 7 Android 4.4.2 talking to my IOIO V1 with firmware 5 & >>>>>> simply running the Hello IOIO from the 5.0 app lib package talking over >>>>>> USB. >>>>>> >>>>>> The IOIO is recognized once connected, and an alert prompt asks me >>>>>> once USB debugging is turn off if I would like to "Open Hello IOOI when >>>>>> this USB accessory is connected?" and then again when I run the app to >>>>>> "Allow the app Hello IOIO to access the USB accessory?." But the LED >>>>>> light >>>>>> just does not. turn. on... :| Tried both digital IO pin 0, and a LED of >>>>>> my >>>>>> own which I know turns on in pin 13. >>>>>> >>>>>> I've tried the USB connection on two different boards, both of which >>>>>> are able to work fine via bluetooth. >>>>>> >>>>>> Any thoughts? >>>>>> >>>>>> Brad >>>>>> >>>>>> On Tuesday, February 11, 2014 11:54:51 PM UTC-8, tyimofej wrote: >>>>>>> >>>>>>> Hello >>>>>>> >>>>>>> Following Phirons method, I also managed to connect on Android 4.3.1 >>>>>>> via USB (firmware 4v). >>>>>>> MTP PTP ADB USB_STORAGE NONE are possible values of >>>>>>> persist.sys.usb.config (media device, photo device, adb, usb drive) >>>>>>> settings somwhere deep in the system. You can read the value by getprop >>>>>>> persist.sys.usb.config command in the local terminal. >>>>>>> According to documentation, three should be a ACCESSORY value as >>>>>>> well, but I never managed to switch it on (setprop >>>>>>> persist.sys.usb.config >>>>>>> ACCESSORY) . >>>>>>> You must be root to use the setprop command. >>>>>>> >>>>>>> Tyimofej >>>>>>> >>>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "ioio-users" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> >>>>>> To post to this group, send email to [email protected]. >>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>> >>>>> -- >>>>> You received this message because you are subscribed to a topic in the >>>>> Google Groups "ioio-users" group. >>>>> To unsubscribe from this topic, visit >>>>> https://groups.google.com/d/topic/ioio-users/mi6TCoHG9I4/unsubscribe. >>>>> To unsubscribe from this group and all its topics, send an email to >>>>> [email protected]. >>>>> >>>>> To post to this group, send email to [email protected]. >>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "ioio-users" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To post to this group, send email to [email protected]. >>>> Visit this group at http://groups.google.com/group/ioio-users. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "ioio-users" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/ioio-users/mi6TCoHG9I4/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> To post to this group, send email to [email protected]. >>> Visit this group at http://groups.google.com/group/ioio-users. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "ioio-users" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/ioio-users. >> For more options, visit https://groups.google.com/d/optout. >> > -- > You received this message because you are subscribed to a topic in the > Google Groups "ioio-users" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/ioio-users/mi6TCoHG9I4/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
