Can you post any other GRE or PPTP-related rules you use?
(using this line alone didn't do the trick...)

On Wed, Jan 14, 2004 at 06:56:10PM +1100, Adam Summerfield put into existance:
] This is the line that I use.
] 
] pass  in  quick on sppp0 proto gre from any to any keep state keep frags
] 
] Adam
] 
] -----Original Message-----
] From: [EMAIL PROTECTED]
] [mailto:[EMAIL PROTECTED] On Behalf Of Flemming Laugaard
] Sent: Wednesday, 14 January 2004 5:52 PM
] To: [EMAIL PROTECTED]
] Subject: RE: IPFilter 3.4.33pre1, GRE/PPTP client behind firewall
] 
] Have you added a line like
] 
] pass in log first quick proto 47 from x.x.x.x/yy to z.z.z.z/yy ?
] 
] Kind regards
] Flemming Laugaard
] 
] > I have a similar setup to yours, except ADSL not dialup.
] >
] > I don't think you need to have a rdr statement for the GRE unless you
] > are running a pptp server on another internal box (I don't have it and
] > what you want works fine for me).
] >
] > I allow everything out by default and I have a rule that allows GRE
] > from any to any back in.
] >
] > This allows me to connect from my two windows pc's to a pptp server at
] > work.
] >
] > Regards,
] >
] > Adam
] >
] > -----Original Message-----
] > From: [EMAIL PROTECTED]
] > [mailto:[EMAIL PROTECTED] On Behalf Of
] > [EMAIL PROTECTED]
] > Sent: Wednesday, 14 January 2004 11:42 AM
] > To: [EMAIL PROTECTED]
] > Subject: IPFilter 3.4.33pre1, GRE/PPTP client behind firewall
] >
] > I understand this issue has been hashed again and again and again
] > hundreds of times... but after
] > searching the archives, I am still stumped.
] >
] > Situation:
] > I have a Sun Ultra 5 (Solaris 9) as a dialup
] > router/firewall/server/kitchen sink/etc. at home, which
] > maintains a dialup modem connection to my ISP.  We'll say its Internet
] > address is 64.64.64.64 (dev sppp0) at the moment.
] > I also have an internal LAN, 192.168.0.0/24.  My Sun box's IP on this
] > LAN is 192.168.0.1 (dev hme0), and it is the default
] > route for all internal LAN boxes (it also runs Sun's DHCP server).
] >
] > I have a laptop on this LAN.  My laptop has RedHat Linux 9 with
] > PPTP software installed, and that works great (when it's given a real
] > Internet address).
] > It is the ONLY client in my LAN which needs to do ANYTHING with PPTP
] or
] > GRE.  It needs to connect to the
] > corporate VPN server (which is on a public Internet IP), we'll call it
] > 12.12.12.12.
] > My laptop's IP is 192.168.0.45.
] >
] > I understand I can set up a rdr using IPNat so GRE packets coming from
] > 12.12.12.12 to my dialup modem can be
] > redirected to my laptop's IP (192.168.0.45) using a rule like:
] > rdr sppp0 0.0.0.0/0 port 0 -> 192.168.0.45 port 0 gre
] >
] > I am not sure if this works, because the following scenario exists
] when
] > I try to make a PPTP connection:
] >
] > My laptop sends packets to the corporate VPN server (12.12.12.12) with
] > protocol=47 (GRE), however
] > Source IP=192.168.0.45, Dest IP=12.12.12.12.  That's fine, except my
] > Sun box continues to send that packet
] > out the modem as Source=192.168.0.45, Dest=12.12.12.12 !
] > It does not rewrite the Source IP of the outbound GRE packet.  Are
] > there any rules I should add to enable this?
] >
] > Note that I determined this by use of Solaris's "snoop" program.  I
] > noticed that TCP NAT'ed packets for the port 1723
] > connection appeared in "snoop" as bearing the destination/source IP of
] > the Sun box's dialup modem IP, rather than the
] > laptop's internal IP.  The IP packets bearing protocol "47" all said
] > source IP of 192.168.0.45, so I assume that means
] > it sent the packet out the modem as such.
] >
] >
] >
] > Also for the record, I have basic TCP/UDP NAT'ing for all boxes in my
] > internal LAN, using the following IPNat rule:
] > map sppp0 192.168.0.0/24 -> 0.0.0.0/32 portmap tcp/udp 20000:30000
] >
] >
] > Thank you very much!
] 
] 
] Med venlig hilsen
] Kind regards
] 
] Flemming Laugaard
] 

Reply via email to