Sanjay, The IPMI SEL should log those events, BUT ... the sensors for each platform can be configured at the factory to log or not log events via a setting in its SDR. This is normally written out in the initial SDR settings at the factory. Every platform I've ever tested does have a SEL event for power off/on, etc. HP should be able to give more information as to how this is set or changed in the SDR.
For a PET, IPMI systems usually have some default PEF table entries to generate PETraps, but I don't know what those are for HP Proliant. You can view them with "ipmiutil lan" or "pefconfig" from http://ipmiutil.sf.net. If these events are not covered by the factory default PEF entries, you could compose a custom PEF table entry to report this, but the SDR would have to have the eventing enabled for that sensor as mentioned above. Andy -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of sanjay verma Sent: Tuesday, February 13, 2007 7:48 AM To: ipmitool-devel@lists.sourceforge.net Subject: [Ipmitool-devel] HP ProLiant power off/on/reset events Greetings, I am using HP ProLiant systems and ipmitool-1.8.8 and want to be informed about a power off/on/reset events by mining SEL events or by receiving IPMI PET. Does IPMI SEL logs such events? I did not see such events even after issuing several power off/on/reset commands. Does ipmitool support PEF operations to set alert destination addresses and enable BMCs to sendout PET for off/on/reset events? Regards, SKV ________________________________________________________________________ ____________ Bored stiff? Loosen up... Download and play hundreds of games for free on Yahoo! Games. http://games.yahoo.com/games/front ------------------------------------------------------------------------ - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier. Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier. Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
