Sebastian Ewert wrote:
> Hi,
>
> we use Ubuntu 6.06 (LTS) on our Fujitsu-Siemens RX300-S2 Servers. I'm
> trying to setup IPMI at the moment.
I see the same problems with the FSC RX300-S3. I use ipmitool mostly
via lanplus and the sdr temperature readings are the same you see
via the iRMC Web Server or the ssh interface. However the
ipmitool sensor command gives the following errors:
# ipmitool -I lanplus [...] sensor list
Error reading sensor Systemboard (#01)
Error reading sensor CPU 1 (#02)
Error reading sensor CPU 2 (#03)
Error reading sensor FBD-1A (#04)
Error reading sensor FBD-2A (#05)
Error reading sensor FBD-1B (#06)
Error reading sensor FBD-2B (#07)
Error reading sensor FBD-1C (#08)
Error reading sensor FBD-2C (#09)
Error reading sensor FBD-1D (#0a)
Error reading sensor FBD-2D (#0b)
Error reading sensor Ambient (#0c)
Error reading sensor Main +12V (#0d)
Error reading sensor Main -12V (#0e)
Error reading sensor Main +5V (#0f)
...
Next point is, that I cannot get sol to work with the iRMC:
ipmitool -I lanplus [...] -v sol activate
This BMC does not support IPMI v2 / RMCP+
Error: Unable to establish IPMI v2 / RMCP+ session
Error: No response activating SOL payload
So in this case I use the iRMC ssh interface to get a
serial console. This works, but reliable only at 9600.
The chassis power on/off stuff also works, so in summary
one can handle the nodes remotely, although some
points are missing.
Bye, Ralf
--
Ralf Utermann
_____________________________________________________________________
Universität Augsburg, Institut für Physik -- EDV-Betreuer
Universitätsstr.1
D-86135 Augsburg Phone: +49-821-598-3231
SMTP: [EMAIL PROTECTED] Fax: -3411
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Ipmitool-devel mailing list
Ipmitool-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
