Liebig, Holger wrote: >> we use Ubuntu 6.06 (LTS) on our Fujitsu-Siemens RX300-S2 >> Servers. I'm trying to setup IPMI at the moment. >> >> For the beginning I'm just interested in getting it run on >> the OpenIPMI Kernel Interface and particularly I want the >> temperatures (there's a problem with the cooling system in >> the server room). Problem is the difference in output, >> between 'ipmitool sdr' and 'ipmitool sensor': >> >> ipmitool sdr: >> [EMAIL PROTECTED]:~/ipmitool-1.8.9/src# ./ipmitool sdr >> Systemboard | 31 degrees C | ok >> CPU0 | 36 degrees C | ok >> CPU1 | 36 degrees C | ok >> Ambient | 27 degrees C | ok >> Main +12V | 12.13 Volts | ok >> ... >> > > This is most likely due to the fact, that the BMC uses an I2C address of > 0x24 instead of the default 0x20. ipmitool then tries to bridge the get > sensor reading command with the send message command to the BMC (in > order to forward it from std. address 0x20 to address 0x24). > > As a workaround, please us the ipmitool with -m 0x24 -t 0x24 command > line options (or use an older version of ipmitool like 1.8.2).
That did the trick. Thank you very much... ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
