Hi, Thanks for replying . I am getting the following error
ipmitool -H .........-U ..... -P ........ -m 0x20 -t 0x9a sel Get SEL Info command failed: Invalid command ipmitool -H ......... -U ........ -P ....... mc info gives the following output : - Device ID : 0 Device Revision : 0 Firmware Revision : 2.44 IPMI Version : 1.5 Manufacturer ID : 16394 Manufacturer Name : Pigeon Point Systems Product ID : 0 (0x0000) Product Name : Unknown (0x0) Device Available : yes Provides Device SDRs : yes Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device IPMB Event Receiver IPMB Event Generator Chassis Device Aux Firmware Rev Info : 0x02 0x44 0x02 0x30 So i Guess LAN is alright. Amul On Mon, Apr 6, 2009 at 6:34 PM, Isabelle, Francois < francois.isabe...@ca.kontron.com> wrote: > I don't know how 'ipmievd' works but if you want to fetch the SEL from > 0x9a, you should use 'ipmitool'. > > ipmitool -H ... -U ... -P ..... -m 0x20 -t 0x9a sel > > >>Error: Unable to establish LAN session > >>Unable to open interface > > Try : "ipmitool -H ... -U ... -P ..... mc info" first to test the LAN > connection > > Once this works, you should be able to run "ipmitool -H .... -U ///// -P > ........ -m 0x20 -t 0x9a mc info" or "ipmitool -H .... -U ///// -P ........ > -m 0x20 -t 0x9a lan print 1" (assuming the target implements IOL on channel > 1) > > Hope this helps > > François Isabelle > ________________________________________ > De : Amul Adagale [mailto:a...@linsyssoft.com] > Envoyé : 6 avril 2009 03:14 > À : ipmitool-devel@lists.sourceforge.net > Objet : [Ipmitool-devel] problems with ipmievd > > > Hi All, > I have been trying to monitor a chassis using the ipmievd tool. It logs the > events in the syslog of the remote machine but I am unable to understand > where these events originate (which board). Following is a snapshot of the > messages that are logged: > ipmievd: System Firmware Progress sensor - Primary CPU initialization > ipmievd: System Firmware Progress sensor - Management controller > initialization > ipmievd: System Boot Initiated sensor - Initiated by warm reset > ipmievd: System Firmware Progress sensor - Option ROM initialization > ipmievd: System Firmware Progress sensor - Option ROM initialization > ipmievd: System Firmware Error sensor - Unrecoverable hard-disk controller > failure > ipmievd: System Firmware Progress sensor - System boot initiated > Also I tried using -m ipmbadd -t slave_address but it gives the following > error > > ipmievd -H ... -U ... -P ..... -m 0x20 -t 0x9a sel > ipmievd: using pidfile /var/run/ipmievd.pid0 > Error: Unable to establish LAN session > Unable to open interface > > > Could anyone please tell me whether something is wrong with my > understanding or if I am doing anything wrong ? > > > > > Thanks in Advance, > > Amul > > >
------------------------------------------------------------------------------
_______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
