Just to add to my previous mail. ipmievd gives the ">Error: Unable to establish LAN session >>Unable to open interface" message only when i try to run ipmievd with -m and -t .
Amul On Mon, Apr 6, 2009 at 6:54 PM, Amul Adagale <a...@linsyssoft.com> wrote: > Hi, > > Thanks for replying . I am getting the following error > > ipmitool -H .........-U ..... -P ........ -m 0x20 -t 0x9a sel > Get SEL Info command failed: Invalid command > > ipmitool -H ......... -U ........ -P ....... mc info > gives the following output : - > Device ID : 0 > Device Revision : 0 > Firmware Revision : 2.44 > IPMI Version : 1.5 > Manufacturer ID : 16394 > Manufacturer Name : Pigeon Point Systems > Product ID : 0 (0x0000) > Product Name : Unknown (0x0) > Device Available : yes > Provides Device SDRs : yes > Additional Device Support : > Sensor Device > SDR Repository Device > SEL Device > FRU Inventory Device > IPMB Event Receiver > IPMB Event Generator > Chassis Device > Aux Firmware Rev Info : > 0x02 > 0x44 > 0x02 > 0x30 > > So i Guess LAN is alright. > Amul > > > On Mon, Apr 6, 2009 at 6:34 PM, Isabelle, Francois < > francois.isabe...@ca.kontron.com> wrote: > >> I don't know how 'ipmievd' works but if you want to fetch the SEL from >> 0x9a, you should use 'ipmitool'. >> >> ipmitool -H ... -U ... -P ..... -m 0x20 -t 0x9a sel >> >> >>Error: Unable to establish LAN session >> >>Unable to open interface >> >> Try : "ipmitool -H ... -U ... -P ..... mc info" first to test the LAN >> connection >> >> Once this works, you should be able to run "ipmitool -H .... -U ///// -P >> ........ -m 0x20 -t 0x9a mc info" or "ipmitool -H .... -U ///// -P ........ >> -m 0x20 -t 0x9a lan print 1" (assuming the target implements IOL on channel >> 1) >> >> Hope this helps >> >> François Isabelle >> ________________________________________ >> De : Amul Adagale [mailto:a...@linsyssoft.com] >> Envoyé : 6 avril 2009 03:14 >> À : ipmitool-devel@lists.sourceforge.net >> Objet : [Ipmitool-devel] problems with ipmievd >> >> >> Hi All, >> I have been trying to monitor a chassis using the ipmievd tool. It logs >> the events in the syslog of the remote machine but I am unable to understand >> where these events originate (which board). Following is a snapshot of the >> messages that are logged: >> ipmievd: System Firmware Progress sensor - Primary CPU initialization >> ipmievd: System Firmware Progress sensor - Management controller >> initialization >> ipmievd: System Boot Initiated sensor - Initiated by warm reset >> ipmievd: System Firmware Progress sensor - Option ROM initialization >> ipmievd: System Firmware Progress sensor - Option ROM initialization >> ipmievd: System Firmware Error sensor - Unrecoverable hard-disk controller >> failure >> ipmievd: System Firmware Progress sensor - System boot initiated >> Also I tried using -m ipmbadd -t slave_address but it gives the following >> error >> >> ipmievd -H ... -U ... -P ..... -m 0x20 -t 0x9a sel >> ipmievd: using pidfile /var/run/ipmievd.pid0 >> Error: Unable to establish LAN session >> Unable to open interface >> >> >> Could anyone please tell me whether something is wrong with my >> understanding or if I am doing anything wrong ? >> >> >> >> >> Thanks in Advance, >> >> Amul >> >> >> >
------------------------------------------------------------------------------
_______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
