Thanks a lot for all your help... Amul
On Mon, Apr 6, 2009 at 7:13 PM, Isabelle, Francois < francois.isabe...@ca.kontron.com> wrote: > >>ipmitool -H .........-U ..... -P ........ -m 0x20 -t 0x9a sel > Get SEL Info command failed: Invalid command (the target @ 0x9a does not > implement the SEL) > > >> So i Guess LAN is alright. > On the SHMM yes ( @ 0x20), however the target @ 0x9a might not support it. > > I see what your problem is, if you want to know the originator, use > "ipmitool -H 172.16.0.8 -U "" -P "" sel list -v", this will give you the > 'generator id' > > You can try to use the CLI or the WEB gui on the SHMM as well, if you feel > stuck at this low level stuff. > > François Isabelle > > ________________________________________ > De : Amul Adagale [mailto:a...@linsyssoft.com] > Envoyé : 6 avril 2009 09:25 > À : Isabelle, Francois > Cc : ipmitool-devel@lists.sourceforge.net > Objet : Re: [Ipmitool-devel] problems with ipmievd > > Hi, > > Thanks for replying . I am getting the following error > > ipmitool -H .........-U ..... -P ........ -m 0x20 -t 0x9a sel > Get SEL Info command failed: Invalid command > > ipmitool -H ......... -U ........ -P ....... mc info > gives the following output : - > Device ID : 0 > Device Revision : 0 > Firmware Revision : 2.44 > IPMI Version : 1.5 > Manufacturer ID : 16394 > Manufacturer Name : Pigeon Point Systems > Product ID : 0 (0x0000) > Product Name : Unknown (0x0) > Device Available : yes > Provides Device SDRs : yes > Additional Device Support : > Sensor Device > SDR Repository Device > SEL Device > FRU Inventory Device > IPMB Event Receiver > IPMB Event Generator > Chassis Device > Aux Firmware Rev Info : > 0x02 > 0x44 > 0x02 > 0x30 > > So i Guess LAN is alright. > Amul > > On Mon, Apr 6, 2009 at 6:34 PM, Isabelle, Francois < > francois.isabe...@ca.kontron.com> wrote: > I don't know how 'ipmievd' works but if you want to fetch the SEL from > 0x9a, you should use 'ipmitool'. > > ipmitool -H ... -U ... -P ..... -m 0x20 -t 0x9a sel > > >>Error: Unable to establish LAN session > >>Unable to open interface > Try : "ipmitool -H ... -U ... -P ..... mc info" first to test the LAN > connection > > Once this works, you should be able to run "ipmitool -H .... -U ///// -P > ........ -m 0x20 -t 0x9a mc info" or "ipmitool -H .... -U ///// -P ........ > -m 0x20 -t 0x9a lan print 1" (assuming the target implements IOL on channel > 1) > > Hope this helps > > François Isabelle > ________________________________________ > De : Amul Adagale [mailto:a...@linsyssoft.com] > Envoyé : 6 avril 2009 03:14 > À : ipmitool-devel@lists.sourceforge.net > Objet : [Ipmitool-devel] problems with ipmievd > > > Hi All, > I have been trying to monitor a chassis using the ipmievd tool. It logs the > events in the syslog of the remote machine but I am unable to understand > where these events originate (which board). Following is a snapshot of the > messages that are logged: > ipmievd: System Firmware Progress sensor - Primary CPU initialization > ipmievd: System Firmware Progress sensor - Management controller > initialization > ipmievd: System Boot Initiated sensor - Initiated by warm reset > ipmievd: System Firmware Progress sensor - Option ROM initialization > ipmievd: System Firmware Progress sensor - Option ROM initialization > ipmievd: System Firmware Error sensor - Unrecoverable hard-disk controller > failure > ipmievd: System Firmware Progress sensor - System boot initiated > Also I tried using -m ipmbadd -t slave_address but it gives the following > error > > ipmievd -H ... -U ... -P ..... -m 0x20 -t 0x9a sel > ipmievd: using pidfile /var/run/ipmievd.pid0 > Error: Unable to establish LAN session > Unable to open interface > > > Could anyone please tell me whether something is wrong with my > understanding or if I am doing anything wrong ? > > > > > Thanks in Advance, > > Amul > > >
------------------------------------------------------------------------------
_______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
