16.05.2021 16:06, I wrote:
[...]
I'm asking for this testing in order to eliminate problems potentially
caused by interaction with your Etherboot ROM.
Yes, this is reasonable enough. As harddisk image somehow failed to be
recognized by this board, I'll try to look into attaching a floppy drive
(so a real fun starts)
Ok, no need for a floppy actually. Apparently the "boot partition"
method is still usable as long as disk partitioning was performed
carefully (I ran Msdos' fdisk utility on this same board to add a
partition so as to avoid possible conflicts with BIOS' geometry settings).
The result is a total hang with no message displayed whatsoever and Caps
Lock not responding.
I'm quite sure loading from disk is successfull, because from my
previous attempts I know an error message would be displayed in case of
a read failure.
Thank you,
Regards,
Nikolai
_______________________________________________
ipxe-devel mailing list
ipxe-devel@lists.ipxe.org
https://lists.ipxe.org/mailman/listinfo/ipxe-devel
