On 16/05/2021 21:04, Michael Brown wrote:
On 16/05/2021 21:04, Nikolai Zhubr wrote:
Ok, no need for a floppy actually. Apparently the "boot partition"
method is still usable as long as disk partitioning was performed
carefully (I ran Msdos' fdisk utility on this same board to add a
partition so as to avoid possible conflicts with BIOS' geometry
settings).
The result is a total hang with no message displayed whatsoever and
Caps Lock not responding.
I'm quite sure loading from disk is successfull, because from my
previous attempts I know an error message would be displayed in case
of a read failure.
Thanks for testing. Next step is probably to try building with
DEBUG=libprefix
I've sourced a 486 system (courtesy of some kind people who responded on
Twitter) so should be able to also test for myself on Wednesday.
Michael
_______________________________________________
ipxe-devel mailing list
ipxe-devel@lists.ipxe.org
https://lists.ipxe.org/mailman/listinfo/ipxe-devel
