> From: "Tim Berger" <[EMAIL PROTECTED]> > Subject: Re: [ivtv-devel] 0.7.0 : "1000 ms time out waiting for > firmware" problem becomes worse > To: "Discussion list for development of the IVTV driver" > <[email protected]> > Message-ID: > <[EMAIL PROTECTED]> > Content-Type: text/plain; charset="iso-8859-1" > > Yep, I also just started seeing this after upgrading to 2.6.17. Using > kernel rpm release 2157_FC5 with the 0.7.0-117 ivtv kernel module. Using > rpms from the atrpms repo. This is on an athlon x2. Never saw this > before > with kernel-2.6.16-1.2111_FC5 & ivtv 0.6.2 or previous. So I'm swiching > back for now. > > This is with two PVR-250's and encoder fw 0x02050032 (md5sum > d85cb08382395390dc95ac6ebc2205f9).
Which application do you use? I had this with vdr + pvr350-plugin, which was using a lot of direct fwapi calls. I replaced them against ioctl commands (unfortunately, channel switching is much slower now -but this is another story...) At the same time Hans fixed the firmware timeout problem in all branches, and I can`t rember any timeouts since that time. I am using v4f-dvb hg with ivtv trunk. Kernel 2.6.15 and now 2.6.17.6 -- Echte DSL-Flatrate dauerhaft für 0,- Euro*. Nur noch kurze Zeit! "Feel free" mit GMX DSL: http://www.gmx.net/de/go/dsl _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
