> From: "Tim Berger" <[EMAIL PROTECTED]>
> Subject: Re: [ivtv-devel] 0.7.0 : "1000 ms time out waiting for
> firmware" problem becomes worse
> To: "Discussion list for development of the IVTV driver"
> <[email protected]>
> Message-ID:
> < [EMAIL PROTECTED]>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Yep, I also just started seeing this after upgrading to 2.6.17. Using
> kernel rpm release 2157_FC5 with the 0.7.0-117 ivtv kernel module. Using
> rpms from the atrpms repo. This is on an athlon x2. Never saw this
> before
> with kernel-2.6.16-1.2111_FC5 & ivtv 0.6.2 or previous. So I'm swiching
> back for now.
>
> This is with two PVR-250's and encoder fw 0x02050032 (md5sum
> d85cb08382395390dc95ac6ebc2205f9).
Which application do you use? I had this with vdr + pvr350-plugin, which was using a lot of direct fwapi calls. I replaced them against ioctl commands (unfortunately, channel switching is much slower now -but this is another story...)
mythtv from the atrpms repo. mythtv-backend-0.19-129.rhfc5.at.x86_64
This is with encoder firmware 0x02050032. I'm trying encoder 0x02040024 to see if that makes any difference.
The ivtv packages are also 64bit.
ivtv-0.7.0-117.fc5.at.x86_64
ivtv-firmware-audio-0.0.1-5.at.noarch
ivtv-firmware-dec-2.02.023-9.at.noarch
ivtv-firmware-enc-2.04.024-9.at.noarch
ivtv-kmdl-2.6.17-1.2157_FC5-0.7.0-117.fc5.at.x86_64
perl-Video-ivtv-0.13-8.fc5.at.x86_64
Regards.
At the same time Hans fixed the firmware timeout problem in all branches, and I can`t rember any timeouts since that time. I am using v4f-dvb hg with ivtv trunk. Kernel 2.6.15 and now 2.6.17.6
--
Echte DSL-Flatrate dauerhaft für 0,- Euro*. Nur noch kurze Zeit!
"Feel free" mit GMX DSL: http://www.gmx.net/de/go/dsl
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
--
-Tim
_______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
