On Friday 17 November 2006 17:18, Hans Verkuil wrote:
> On Friday 17 November 2006 16:54, Han Holl wrote:
> > On Friday 17 November 2006 15:28, Hans Verkuil wrote:
> > > Sometimes it takes awhile for me to wake up :-)
> > >
> > > You are using cx25840, wm8775 and tuner modules from ivtv-0.3
> > > instead of those from the 2.6.18 kernel. You can see that based
> > > on the 'ivtv i2c driver' lines in the log.
> > >
> > > Remove those old modules and try again. It should work now.
> >
> > Well, this would be very surprising.
> > As far as I know, I installed a fresh fc6 in it's own partition,
> > did yum update and yum install mythtv from atrpms. (maybe a
> > separate yum install ivtv).
> > After a fresh reboot and a fresh updatedb I do: ls -lu $(locate
> > cx25840.ko) and get:
> > -rw-r--r-- 1 root root 298502 Nov 17
> > 16:35 /altroot/lib/modules/2.6.11-1.27_FC3/ivtv/cx25840.ko
> > -rw-r--r-- 1 root root 57096 Nov 4
> > 15:43
> > /altroot/lib/modules/2.6.11-1.27_FC3/updates/drivers/media/video/cx
> >25 840.ko.NOT -rwxr--r-- 1 root root 35032 Nov 15
> > 20:59
> > /lib/modules/2.6.18-1.2798.fc6/kernel/drivers/media/video/cx25840/c
> >x2 5840.ko -rwxr--r-- 1 root root 35032 Nov 17
> > 16:42
> > /lib/modules/2.6.18-1.2849.fc6/kernel/drivers/media/video/cx25840/c
> >x2 5840.ko
> >
> > (sorry for the formatting).
> > cd
> > /lib/modules/2.6.18-1.2849.fc6/kernel/drivers/media/video/cx25840/
> > rpm -qf cx25840.ko
> > kernel-2.6.18-1.2849.fc6
> > and rpm -V kernel-2.6.18-1.2849.fc6
> > returns an empty prompt.
> >
> > I sure haven't tried to recompile cx25840 and wm8775.
> >
> > I don't see how this could happen, unless fedora somehow ships with
> > the wrong modules.
>
> If you see lines like this:
>
> tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
> tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
> tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
>
> (note the 'ivtv i2c driver' text) then you have old drivers. Period.
> Do a find for them in the /lib/modules/... directory. BTW, I looked
> at the log you provided in your original message. If you since have
> setup a fresh box, then I was obviously looking at an old log and you
> can forget about it.
Never mind, it's not my day. Just forget I posted this. You have the
correct modules loaded, so just do the test with the different inputs I
suggested earlier. Sorry for the confusion.
Hans
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
