[ivtv-devel] LG S001D MK3 Tuner of 150mce not detected with kernel 2.6.11-RC4

Rob ter Veer Mon, 21 Feb 2005 13:30:21 -0800

It was an OEM version, so no driver CD or remote. Hereby the requested information:

Frontside: http://members.chello.nl/~r.terveer/Picture%20070.jpg
Backside : http://members.chello.nl/~r.terveer/Picture.jpg

Tuner:
           PAL-B/G-I-D/K-SECAM
           26559
           rev B260
           Assembled in Malaysia

Small square right:
           conexant
           cx25843-23
           41002299
           0443  KOREA

Big square under:     conexant
           MPEG II A/V ENCODER
           CX23416-12
           0428Y1CR
           0429  TAIWAN

lspci -v: 0000:00:0d.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23 416) MPEG-2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc.: Unknown device 8801 Flags: bus master, medium devsel, latency 64, IRQ 5 Memory at c0000000 (32-bit, prefetchable) Capabilities: [44] Power Management version 2

lspci -vn:
0000:00:0d.0 Class 0400: 4444:0016 (rev 01)
       Subsystem: 0070:8801
       Flags: bus master, medium devsel, latency 64, IRQ 5
       Memory at c0000000 (32-bit, prefetchable)
       Capabilities: [44] Power Management version 2

dmesg: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.2 (d) loading ivtv: Linux version: 2.6.11-rc4 preempt K7 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 5 (level, low) -> IRQ 5 ivtv: XXX PCI device: 0x0735 vendor: 0x1039 tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13883 loaded. cx25840: FW image md5 digest: a6f6a90a3be338cdb89d59e835798408 cx25840: FW image sha1 digest: ad2872fb98ad43b6c4afa45d239a57010edebe84 ivtv: i2c attach [client=cx25840[1],ok] wm8775: starting probe for adapter ivtv i2c driver #0 (0x10005) wm8775: detecting client on address 0x36 wm8775: Offset reset.reg[0]=2e00 wm8775: Offset reset.reg[1]=0e00 wm8775: Offset reset.reg[2]=1600 wm8775: Offset reset.reg[3]=1800 wm8775: Offset reset.reg[4]=1a00 wm8775: Offset reset.reg[5]=1c00 wm8775: Offset reset.reg[6]=1e00 wm8775: Offset reset.reg[7]=2000 wm8775: Offset reset.reg[8]=2200 wm8775: Offset reset.reg[9]=2400 wm8775: Offset reset.reg[10]=2600 wm8775: Offset reset.reg[11]=2800 wm8775: Offset reset.reg[12]=2a00 wm8775: Updating reg[R23]=2e01 added Reset with default 1 wm8775: Updating reg[R7]=0e00 added TOD with default 0 wm8775: Updating reg[R11]=1600 added ADCHPD with default 0 wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0 wm8775: Updating reg[R11]=1620 added ADCWL with default 2 wm8775: Updating reg[R11]=1620 added ADCBCP with default 0 wm8775: Updating reg[R11]=1620 added ADCLRP with default 0 wm8775: Updating reg[R11]=1622 added ADCFMT with default 2 wm8775: Updating reg[R12]=1800 added ADCMS with default 0 wm8775: Updating reg[R12]=1800 added ADCOSR with default 0 wm8775: Updating reg[R12]=1802 added ADCRATE with default 2 wm8775: Updating reg[R13]=1a00 added AINPD with default 0 wm8775: Updating reg[R13]=1a00 added ADCPD with default 0 wm8775: Updating reg[R13]=1a00 added PWDN with default 0 wm8775: Updating reg[R14]=1c00 added ZCLA with default 0 wm8775: Updating reg[R14]=1ccf added LAG with default 207 wm8775: Updating reg[R15]=1e00 added ZCRA with default 0 wm8775: Updating reg[R15]=1ecf added RAG with default 207 wm8775: Updating reg[R16]=2000 added LCSEL with default 0 wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7 wm8775: Updating reg[R16]=207b added LCT with default 11 wm8775: Updating reg[R17]=2200 added LCEN with default 0 wm8775: Updating reg[R17]=2200 added ALCZC with default 0 wm8775: Updating reg[R17]=2200 added HLD with default 0 wm8775: Updating reg[R18]=2430 added DCY with default 3 wm8775: Updating reg[R18]=2432 added ATK with default 2 wm8775: Updating reg[R19]=2600 added NGTH with default 0 wm8775: Updating reg[R19]=2600 added NGAT with default 0 wm8775: Updating reg[R20]=2820 added TRANWIN with default 2 wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6 wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0 wm8775: Updating reg[R21]=2a00 added MUTELA with default 0 wm8775: Updating reg[R21]=2a00 added MUTERA with default 0 wm8775: Updating reg[R21]=2a01 added AMX with default 1 wm8775: Final reset.reg[0]=2e01 wm8775: Final reset.reg[1]=0e00 wm8775: Final reset.reg[2]=1622 wm8775: Final reset.reg[3]=1802 wm8775: Final reset.reg[4]=1a00 wm8775: Final reset.reg[5]=1ccf wm8775: Final reset.reg[6]=1ecf wm8775: Final reset.reg[7]=207b wm8775: Final reset.reg[8]=2200 wm8775: Final reset.reg[9]=2432 wm8775: Final reset.reg[10]=2600 wm8775: Final reset.reg[11]=2826 wm8775: Final reset.reg[12]=2a01 wm8775: Offset reset.reg[0]=2e00 wm8775: Offset reset.reg[1]=0e00 wm8775: Offset reset.reg[2]=1600 wm8775: Offset reset.reg[3]=1800 wm8775: Offset reset.reg[4]=1a00 wm8775: Offset reset.reg[5]=1c00 wm8775: Offset reset.reg[6]=1e00 wm8775: Offset reset.reg[7]=2000 wm8775: Offset reset.reg[8]=2200 wm8775: Offset reset.reg[9]=2400 wm8775: Offset reset.reg[10]=2600 wm8775: Offset reset.reg[11]=2800 wm8775: Offset reset.reg[12]=2a00 wm8775: Updating reg[R23]=2e01 added Reset with default 1 wm8775: Updating reg[R7]=0e00 added TOD with default 0 wm8775: Updating reg[R11]=1600 added ADCHPD with default 0 wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0 wm8775: Updating reg[R11]=1620 added ADCWL with default 2 wm8775: Updating reg[R11]=1620 added ADCBCP with default 0 wm8775: Updating reg[R11]=1620 added ADCLRP with default 0 wm8775: Updating reg[R11]=1622 added ADCFMT with default 2 wm8775: Updating reg[R12]=1800 added ADCMS with default 0 wm8775: Updating reg[R12]=1800 added ADCOSR with default 0 wm8775: Updating reg[R12]=1802 added ADCRATE with default 2 wm8775: Updating reg[R13]=1a00 added AINPD with default 0 wm8775: Updating reg[R13]=1a00 added ADCPD with default 0 wm8775: Updating reg[R13]=1a00 added PWDN with default 0 wm8775: Updating reg[R14]=1c00 added ZCLA with default 0 wm8775: Updating reg[R14]=1ccf added LAG with default 207 wm8775: Updating reg[R15]=1e00 added ZCRA with default 0 wm8775: Updating reg[R15]=1ecf added RAG with default 207 wm8775: Updating reg[R16]=2000 added LCSEL with default 0 wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7 wm8775: Updating reg[R16]=207b added LCT with default 11 wm8775: Updating reg[R17]=2200 added LCEN with default 0 wm8775: Updating reg[R17]=2200 added ALCZC with default 0 wm8775: Updating reg[R17]=2200 added HLD with default 0 wm8775: Updating reg[R18]=2430 added DCY with default 3 wm8775: Updating reg[R18]=2432 added ATK with default 2 wm8775: Updating reg[R19]=2600 added NGTH with default 0 wm8775: Updating reg[R19]=2600 added NGAT with default 0 wm8775: Updating reg[R20]=2820 added TRANWIN with default 2 wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6 wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0 wm8775: Updating reg[R21]=2a00 added MUTELA with default 0 wm8775: Updating reg[R21]=2a00 added MUTERA with default 0 wm8775: Updating reg[R21]=2a01 added AMX with default 1 wm8775: Final reset.reg[0]=2e01 wm8775: Final reset.reg[1]=0e00 wm8775: Final reset.reg[2]=1622 wm8775: Final reset.reg[3]=1802 wm8775: Final reset.reg[4]=1a00 wm8775: Final reset.reg[5]=1ccf wm8775: Final reset.reg[6]=1ecf wm8775: Final reset.reg[7]=207b wm8775: Final reset.reg[8]=2200 wm8775: Final reset.reg[9]=2432 wm8775: Final reset.reg[10]=2600 wm8775: Final reset.reg[11]=2826 wm8775: Final reset.reg[12]=2a01 wm8775: Setting register ADCFMT (7) to 1, R11.0..1, old value 02 wm8775: Setting register ADCMS (8) to 1, R12.8..8, old value 00 wm8775: Setting register DCY (24) to 8, R18.4..7, old value 03 wm8775: Setting register NGAT (27) to 1, R19.0..0, old value 00 wm8775: Setting register LRBOTH (30) to 1, R21.8..8, old value 00 wm8775: Setting register AMX (33) to 15, R21.0..3, old value 01 wm8775: Updating register 0 (R23), config: 2e01 active: 2e00. wm8775: Skipping register 1 (R7), config: 0e00 active: 0e00. wm8775: Updating register 2 (R11), config: 1622 active: 1621. wm8775: Updating register 3 (R12), config: 1802 active: 1902. wm8775: Skipping register 4 (R13), config: 1a00 active: 1a00. wm8775: Skipping register 5 (R14), config: 1ccf active: 1ccf. wm8775: Skipping register 6 (R15), config: 1ecf active: 1ecf. wm8775: Skipping register 7 (R16), config: 207b active: 207b. wm8775: Skipping register 8 (R17), config: 2200 active: 2200. wm8775: Updating register 9 (R18), config: 2432 active: 2482. wm8775: Updating register 10 (R19), config: 2600 active: 2601. wm8775: Skipping register 11 (R20), config: 2826 active: 2826. wm8775: Updating register 12 (R21), config: 2a01 active: 2b0f. ivtv: i2c attach [client=wm8775[1],ok] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach [client=tda9887,ok] ivtv: i2c attach [client=tveeprom,ok] saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 150 card with 4 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Setting Tuner 38 tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0 ivtv: ivtv_enc_thread: pid = 7430, itv = 0xd0b5e7e0 ivtv: Switching standard to PAL. ivtv: Initialized WinTV PVR 150, card #0 ivtv: Autodetected WinTV PVR 250 card ivtv: Found an iTVC15 based chip ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 11 (level, low) -> IRQ 11 ivtv: XXX PCI device: 0x0735 vendor: 0x1039 tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach [client=(tuner unset),ok] wm8775: starting probe for adapter ivtv i2c driver #1 (0x10005) ivtv: i2c attach [client=tveeprom,ok] saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[1],ok] saa7115: status: (1E) 0x48, (1F) 0xc0 msp34xx: ivtv version msp34xx: init: chip=MSP3415G-B8, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Feb 21 2005 14:37:30 ivtv: i2c attach [client=MSP3415G-B8,ok] tveeprom: Hauppauge: model = 48034, rev = G742, serial# = 6252580 tveeprom: tuner = Temic 4009FR5 (idx = 42, type = 20) tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007) tveeprom: audio_processor = MSP3415 (type = 6) ivtv: Tuner Type 20, Tuner formats 0x00000007, Radio: yes, Model 0x009d7512, Revision 0xd0b7dbb4 ivtv: Radio detected ivtv: Encoder revision: 0x02040011 ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 250 card with 5 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 1 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 33 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 225 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 25 ivtv: Create stream 4 ivtv: Registered v4l2 device, streamtype 4 minor 65 ivtv: Setting Tuner 20 tuner: type set to 20 (Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5)) by ivtv i2c driver #1 saa7115: decoder set input (4) saa7115: now setting Composite input ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to PAL. ivtv: ivtv_enc_thread: pid = 7481, itv = 0xd0b72aa4 ivtv: i2c client addr: 0x43 not found! saa7115: decoder set norm PAL saa7115: set audio: 0x01 ivtv: Initialized WinTV PVR 250, card #1 ivtv: ==================== END INIT IVTV ====================

Hi,
can you send me a picture for inclusion to
http://www.bttv-gallery.de ?
Also this complete info would be helpful:
- picture of the card, the card backside
- picture of remote control (if applicable) and of original package
- list of chips
- list of input connectors
- printings on PCB, printings on stickers on the card
- lspci -v  and   lspci -vn
- "dmesg" when loading the modules
- if feasible "eeprom" output (from bttv tools)
- if feasible "*.INF" files from the Windows Driver CD
- exact tuner type (possibly this is hidden under the vender sticker)
- exact model name and model number from package
- in which country do you live/ in which country this card was bought
Regards, Gunther
Rob ter Veer wrote:
Hi,
I'm trying to get my tuner on the pvr 150MCE detected automaticly. So far, no luck. I'v installed the latest kernel and even tried a seperate install of V4L2 (video4linux-20050218-161823.tar.gz). Still no autodetection of the tuner... This is what tveeprom -said- with the 2.6.10-rc4 kernel and a standard ivtv-0.3.2d installation:
tveeprom: Hauppauge: model = 26559, rev = B260, serial# = 7678930
tveeprom: tuner = LG S001D MK3 (idx = 60, type = 4)
tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
tveeprom: audio_processor = MSP3410D (type = 5)
With the new kernel tveeprom does not output anything abouy the pvr150. Only the pvr250 which is also in the system is reported good:
tveeprom: Hauppauge: model = 48034, rev = G742, serial# = 6252580
tveeprom: tuner = Temic 4009FR5 (idx = 42, type = 20)
tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
tveeprom: audio_processor = MSP3415 (type = 6)
When I select the tuner type 38 everything works fine btw. so there are no real problems.. I just don't get why the tuner is not found by ivtv itself even though I think I live up to the requirements.. :(
Rob.


--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.2.0 - Release Date: 2/21/2005

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

[ivtv-devel] LG S001D MK3 Tuner of 150mce not detected with kernel 2.6.11-RC4

Reply via email to