On Mon, 7 Mar 2005 00:24:22 -0800, Jarod Wilson <[EMAIL PROTECTED]> wrote: > If some PAL PVR-150 and/or 500 users could give these a shot, it'd be much > appreciated. When coupled with Tyler's audiofmt-makefile-autotune.032g.patch > patch, this *should* auto-detect and auto-configure both the LG and Philips > tuners on PAL PVR-150 cards. > > FYI: > The only difference on the tuner side is a renaming of both tuners to remove > PVR-150 from their names (since they could be on other cards, more prep for > having these changes in v4l-proper) and label the type 56 tuner what it > really is, according to tveeprom output and the tveeprom index (FQ1216AME > MK4, not FM1216ME).
Using a PVR150 PAL and ivtv-0.3.2g or 0.3.2h with both patches applies still only gives out static. I get the following : ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.2 (f) loading ivtv: Linux version: 2.6.9-chw-4 SMP preempt 586 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:00:14.0[A] -> GSI 10 (level, low) -> IRQ 10 ivtv: VIA PCI device: 0x3123 vendor: 0x1106 saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) tveeprom: Hauppauge: model = 26034, rev = C197, serial# = 7730006 tveeprom: tuner = LG PAL (TAPE Series) (idx = 97, type = 55) tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x44, v4l2 = 0x00000e07) tveeprom: audio_processor = MSP3400C (type = 4) ivtv: i2c attach [client=tveeprom[5],ok] cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13883 loaded. cx25840: FW image md5 digest: a6f6a90a3be338cdb89d59e835798408 cx25840: FW image sha1 digest: ad2872fb98ad43b6c4afa45d239a57010edebe84 ivtv: i2c attach [client=cx25840[5],ok] wm8775: Setting register ADCFMT (7) to 1, R11.0..1, old value 02 wm8775: Setting register ADCMS (8) to 1, R12.8..8, old value 00 wm8775: Setting register DCY (24) to 8, R18.4..7, old value 03 wm8775: Setting register NGAT (27) to 1, R19.0..0, old value 00 wm8775: Setting register LRBOTH (30) to 1, R21.8..8, old value 00 wm8775: Setting register AMX (33) to 15, R21.0..3, old value 01 wm8775: Updating register 0 (R23), config: 2e01 active: 2e00. wm8775: Skipping register 1 (R7), config: 0e00 active: 0e00. wm8775: Updating register 2 (R11), config: 1622 active: 1621. wm8775: Updating register 3 (R12), config: 1802 active: 1902. wm8775: Skipping register 4 (R13), config: 1a00 active: 1a00. wm8775: Skipping register 5 (R14), config: 1ccf active: 1ccf. wm8775: Skipping register 6 (R15), config: 1ecf active: 1ecf. wm8775: Skipping register 7 (R16), config: 207b active: 207b. wm8775: Skipping register 8 (R17), config: 2200 active: 2200. wm8775: Updating register 9 (R18), config: 2432 active: 2482. wm8775: Updating register 10 (R19), config: 2600 active: 2601. wm8775: Skipping register 11 (R20), config: 2826 active: 2826. wm8775: Updating register 12 (R21), config: 2a01 active: 2b0f. ivtv: i2c attach [client=wm8775[5],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by insmod option tuner: The type=<n> insmod option will go away soon. tuner: Please use the tuner=<n> option provided by tuner: tv aard core driver (bttv, saa7134, ...) instead. ivtv: Tuner Type 55, Tuner formats 0x00000e07, Radio: yes, Model 0x008d1657, Revision 0x00000000 ivtv: PAL tuner detected ivtv: Radio detected ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create stream 4 ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Setting Tuner 55 tuner: type already set to 2, ignoring request for 55 ivtv: ivtv_enc_thread: pid = 6434, itv = 0xd0119920 ivtv: Switching standard to PAL. ivtv: Initialized WinTV PVR 150, card #0 ivtv: ==================== END INIT IVTV ==================== The thing that troubles me is the tuner module setting the type to 2, and printing "type already set to 2, ignoring request for 55". Any insights would be greatly appreciated. If any other information is needed, just ask. Kind regards, Roel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
