Hi- I've got a pvr-350 and added pvr-500 to the system running Mythtv on SuSE 9.2 on a Pundit-R. ivtv 0.3.2k.
The 350 works great, the 1st tuner of the PVR-500mce works great. The 2nd tuner gives me nothing-usually 9 times out of 10 I get a file size of 0 when I #/dev/video2 > /tmp/test_capture.mpg . Once, I let the command go for approximately 15 seconds before hitting control-c and I got a small file- with an mpg that looked like 1 second worth of tv. When I try to use this tuner within MythTV, the system locks and I have to hard reboot... Is this the DMA issue? and I'd be better off trying the new driver? Or should I look for something in the bios? There are 3 of lines at very end of dmesg that read: ivtv: ENC: REG_DMAXFER 2 wait failed ivtv: ENC: REG_DMAXFER 2 wait failed ivtv: ENC: REG_DMAXFER 2 wait failed I'm stumped... I hope I'm missing something stupid. any ideas where to look? Thanks, Mike My /etc/modprobe.conf.local alias char-major-61 lirc_i2c alias char-major-81 videodev alias char-major-81-0 ivtv alias char-major-81-1 ivtv # Uncomment this line if you have two cards. alias char-major-81-2 ivtv # Uncomment this line if you have two cards. #####################added 032205############################# options saa7127 i2c_enable=1,-1,-1 options cx25840 no_black_magic=1 install ivtv /sbin/modprobe --ignore-install ivtv; /sbin/modprobe ivtv-fb IVTV parts of dmesg= ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.2 (k) loading ivtv: Linux version: 2.6.8-24.10-default 586 REGPARM gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 350 card ivtv: Found an iTVC15 based chip ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 10 (level, low) -> IRQ 10 ivtv: XXX PCI device: 0x5833 vendor: 0x1002 module tveeprom unsupported by SUSE/Novell, tainting kernel. tveeprom: Hauppauge: model = 48132, rev = K168, serial# = 7520207 tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3440 (type = 11) ivtv: i2c attach [client=tveeprom[0],ok] ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x00ad1598, Revision 0x00000001 ivtv: NTSC tuner detected ivtv: Radio detected module tuner unsupported by SUSE/Novell, tainting kernel. tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] module saa7115 unsupported by SUSE/Novell, tainting kernel. saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[0],ok] saa7115: status: (1E) 0x48, (1F) 0xc0 module saa7127 unsupported by SUSE/Novell, tainting kernel. saa7127: Ignoring new-style parameters in presence of obsolete ones saa7127: video encoder driver version V 0.3 loaded saa7127: detecting saa7127 client on address 0x88 saa7127: Selecting NTSC video Standard saa7127: Selecting S-Video+Composite saa7127: Turn WSS off saa7127: Widescreen Mode 4:3 Full Format saa7127: Selecting Normal Encoder Input saa7127: Enable Video Output ivtv: i2c attach [client=saa7127[0],ok] module msp3400 unsupported by SUSE/Novell, tainting kernel. msp34xx: ivtv version msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Mar 22 2005 18:50:28 ivtv: i2c attach [client=MSP3448W-A2,ok] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000073b0c9] ivtv: Encoder revision: 0x02050032 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 350 card with 10 streams ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create DMA stream 1 ivtv: Allocate DMA stream 1 ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create stream 2 using 40 52224 byte buffers 0 kbytes total ivtv: Allocate stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Create stream 4 ivtv: Allocate stream 4 ivtv: Registered v4l2 device, streamtype 5 minor 16 ivtv: Create DMA stream 5 using 16 65536 byte buffers 0 kbytes total ivtv: Allocate DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total ivtv: Registered v4l2 device, streamtype 6 minor 228 ivtv: Create stream 6 using 1024 2048 byte buffers 0 kbytes total ivtv: Allocate stream 6 using 1024 2048 byte buffers 262144 kbytes total ivtv: Registered v4l2 device, streamtype 7 minor 232 ivtv: Create stream 7 ivtv: Allocate stream 7 ivtv: Registered v4l2 device, streamtype 8 minor 48 ivtv: Create DMA stream 8 using 6 86400 byte buffers 0 kbytes total ivtv: Allocate DMA stream 8 using 6 86400 byte buffers 518400 kbytes total ivtv: Create DMA stream 9 using 32 65536 byte buffers 0 kbytes total ivtv: Setting Tuner 47 tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0 saa7115: decoder set input (4) saa7115: now setting Composite input ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to NTSC. ivtv: ivtv_enc_thread: pid = 3709, itv = 0xdd761420 ivtv: ivtv_dec_thread: pid = 3710, itv = 0xdd761420 saa7115: decoder set norm NTSC saa7115: set audio: 0x01 saa7127: Setting Encoder Video Standard saa7127: Set NTSC Video Mode saa7127: Selecting NTSC video Standard ivtv: Initialized WinTV PVR 350, card #0 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:04:08.0[A] -> GSI 3 (level, low) -> IRQ 3 ivtv: XXX PCI device: 0x5833 vendor: 0x1002 tveeprom: The eeprom says no radio is present, but the tuner type tveeprom: indicates otherwise. I will assume that radio is present. tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 7855692 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[1],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) saa7127: detecting saa7127 client on address 0x88 saa7127: saa7127 client id: saa7127_i2c_id 1, skipped ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00914652, Revision 0x00000001 ivtv: NTSC tuner detected ivtv: Radio detected module cx25840 unsupported by SUSE/Novell, tainting kernel. cx25840: Ignoring new-style parameters in presence of obsolete ones cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 ivtv: i2c attach [client=cx25840[0],ok] module wm8775 unsupported by SUSE/Novell, tainting kernel. ivtv: i2c attach [client=wm8775[0],ok] ivtv: Encoder revision: 0x02050032 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device, streamtype 0 minor 1 ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 33 ivtv: Create DMA stream 1 ivtv: Allocate DMA stream 1 ivtv: Registered v4l2 device, streamtype 2 minor 225 ivtv: Create stream 2 using 40 52224 byte buffers 0 kbytes total ivtv: Allocate stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 25 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 65 ivtv: Create stream 4 ivtv: Allocate stream 4 ivtv: Setting Tuner 57 tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1 ivtv: ivtv_enc_thread: pid = 3927, itv = 0xdd775714 ivtv: Switching standard to NTSC. ivtv: Initialized WinTV PVR 150, card #1 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:04:09.0[A] -> GSI 7 (level, low) -> IRQ 7 ivtv: XXX PCI device: 0x5833 vendor: 0x1002 tveeprom: The eeprom says no radio is present, but the tuner type tveeprom: indicates otherwise. I will assume that radio is present. tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 7855692 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[2],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #2 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #2 (0x10005) saa7127: detecting saa7127 client on address 0x88 saa7127: saa7127 client id: saa7127_i2c_id 2, skipped cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 ivtv: i2c attach [client=cx25840[1],ok] ivtv: i2c attach [client=wm8775[1],ok] ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00914652, Revision 0x00000001 ivtv: NTSC tuner detected ivtv: Radio detected ivtv: Encoder revision: 0x02050032 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device, streamtype 0 minor 2 ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 34 ivtv: Create DMA stream 1 ivtv: Allocate DMA stream 1 ivtv: Registered v4l2 device, streamtype 2 minor 226 ivtv: Create stream 2 using 40 52224 byte buffers 0 kbytes total ivtv: Allocate stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 26 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 66 ivtv: Create stream 4 ivtv: Allocate stream 4 ivtv: Setting Tuner 57 tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #2 ivtv: ivtv_enc_thread: pid = 4062, itv = 0xdd789a08 ivtv: Switching standard to NTSC. ivtv: Initialized WinTV PVR 150, card #2 ivtv: ==================== END INIT IVTV ==================== module ivtv_fb unsupported by SUSE/Novell, tainting kernel. ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0) ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has 1704960 bytes. ivtv-osd: screen coords: [0 0] -> [720 480] ivtv-osd: original global alpha = 208 ivtv-osd: current OSD state = 39 ivtv-osd: new global alpha = 208 (1 255 0) ivtv-osd: framebuffer at 0xf1510000, mapped to 0xde610000, size 1350k ivtv-osd: mode is 720x480x32, linelength=2880 ivtv-osd: fb1: iTVC15 TV out frame buffer device ivtv: Allocate DMA stream 9 using 32 65536 byte buffers 2097152 kbytes total cs: IO port probe 0x0c00-0x0cff: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7 cs: IO port probe 0x0820-0x08ff: excluding 0x830-0x837 cs: IO port probe 0x0800-0x080f: clean. cs: IO port probe 0x03e0-0x04ff: excluding 0x408-0x40f 0x4d0-0x4d7 cs: IO port probe 0x0100-0x03af: excluding 0x170-0x177 0x260-0x267 0x280-0x287 0x370-0x377 cs: IO port probe 0x0a00-0x0aff: clean. NET: Registered protocol family 10 Disabled Privacy Extensions on device c037f760(lo) IPv6 over IPv4 tunneling driver IA-32 Microcode Update Driver: v1.14 <[EMAIL PROTECTED]> microcode: No suitable data for CPU0 IA-32 Microcode Update Driver v1.14 unregistered ACPI: PCI interrupt 0000:00:14.5[B] -> GSI 3 (level, low) -> IRQ 3 ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU1] (supports C1) powernow: This module only works with AMD K7 CPUs module lirc_dev unsupported by SUSE/Novell, tainting kernel. lirc_dev: IR Remote Control driver registered, at major 61 module lirc_i2c unsupported by SUSE/Novell, tainting kernel. bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture lirc_i2c: chip found @ 0x18 (Hauppauge IR) ivtv: i2c attach [client=Hauppauge IR,ok] lirc_dev: lirc_register_plugin:sample_rate: 10 Disabled Privacy Extensions on device d94a4400(sit0) eth0: no IPv6 routers present lp: driver loaded but no devices found drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic usbcore: registered new driver usbserial_generic usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 Non-volatile memory driver v1.2 bootsplash: status on console 0 changed to on spurious 8259A interrupt: IRQ15. saa7115: decoder disable output saa7115: decoder enable output saa7115: decoder disable output saa7115: decoder enable output ivtv: ENC: REG_DMAXFER 2 wait failed ivtv: ENC: REG_DMAXFER 2 wait failed ivtv: ENC: REG_DMAXFER 2 wait failed ------------------------------------------------------- This SF.net email is sponsored by Microsoft Mobile & Embedded DevCon 2005 Attend MEDC 2005 May 9-12 in Vegas. Learn more about the latest Windows Embedded(r) & Windows Mobile(tm) platforms, applications & content. Register by 3/29 & save $300 http://ads.osdn.com/?ad_id=6883&alloc_id=15149&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
