Also, for the sake of comparison, I'm including the output of my dmesg. Note that I have a PVR-250 and a PVR-500. (Sorry for some of the odd line breaks, the browser is wrapping the lines).
-- Joe ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.3 (k) loading ivtv: Linux version: 2.6.10-1.770_14.rhfc3.at 686 REGPARM gcc-3.4 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 250 card ivtv: Found an iTVC15 based chip ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 5 (level, low) -> IRQ 5 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x0755 vendor: 0x1039 tveeprom: Hauppauge: model = 48012, rev = G426, serial# = 2610903 tveeprom: tuner = Temic 4036FY5 (idx = 26, type = 8) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3445 (type = 12) ivtv: i2c attach [client=tveeprom[50],ok] ivtv: Tuner Type 8, Tuner formats 0x00001000, Radio: yes, Model 0x009d4496, Revi sion 0x00000000 ivtv: NTSC tuner detected ivtv: Radio detected tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[50],ok] saa7115: status: (1E) 0x00, (1F) 0xc0 msp34xx: ivtv version msp34xx: init: chip=MSP3445G-B8, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Apr 25 2005 09:47:51 ivtv: i2c attach [client=MSP3445G-B8,ok] ivtv: Encoder revision: 0x02040024 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 250 card with 5 streams ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create DMA stream 1 ivtv: Allocate DMA stream 1 ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 2 using 80 52224 byte buffers 0 kbytes total ivtv: Allocate DMA stream 2 using 80 52224 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Create stream 4 ivtv: Allocate stream 4 ivtv: Setting Tuner 8 tuner: type set to 8 (Temic NTSC (4036 FY5)) by ivtv i2c driver #0 saa7115: decoder set input (4) saa7115: now setting Composite input ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to NTSC. spurious 8259A interrupt: IRQ7. ivtv: ivtv_enc_thread: pid = 2510, itv = 0xe0a45f20 saa7115: decoder set norm NTSC saa7115: set audio: 0x01 ivtv: Initialized WinTV PVR 250, card #0 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3 PCI: setting IRQ 3 as level-triggered ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 3 (level, low) -> IRQ 3 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x0755 vendor: 0x1039 tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 7893817 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[50],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00914652, Rev ision 0x00000000 ivtv: NTSC tuner detected ivtv: Radio detected cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) cx25840: detecting client on address 0x88 cx25840: writing init values cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13353 loaded. cx25840: FW image md5 digest: aa4d1e3dd17667957d8fe5b8d2d19395 cx25840: FW image sha1 digest: 60eafed58e943664aae4754b32271e09a95496b4 cx25840: Status: cx258433 (DEVICE_ID) ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] ivtv: Encoder revision: 0x02040024 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device, streamtype 0 minor 1 ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 33 ivtv: Create DMA stream 1 ivtv: Allocate DMA stream 1 ivtv: Registered v4l2 device, streamtype 2 minor 225 ivtv: Create DMA stream 2 using 121 34632 byte buffers 0 kbytes total ivtv: Allocate DMA stream 2 using 121 34632 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 25 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 65 ivtv: Create stream 4 ivtv: Allocate stream 4 ivtv: Setting Tuner 57 tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1 cx25840: decoder set input (6) cx25840: Tuner Input cx25840: set audio: 0x01 ivtv: Switching standard to NTSC. cx25840: decoder set norm NTSC cx25840: set audio: 0x01 ivtv: Initialized WinTV PVR 150, card #1 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ivtv: ivtv_enc_thread: pid = 2683, itv = 0xe0a5a034 ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 10 (level, low) -> IRQ 10 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x0755 vendor: 0x1039 tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 7893817 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[50],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #2 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #2 (0x10005) cx25840: starting probe for adapter ivtv i2c driver #2 (0x10005) cx25840: detecting client on address 0x88 cx25840: writing init values cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13353 loaded. cx25840: FW image md5 digest: aa4d1e3dd17667957d8fe5b8d2d19395 cx25840: FW image sha1 digest: 60eafed58e943664aae4754b32271e09a95496b4 cx25840: Status: cx258433 (DEVICE_ID) ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00914652, Rev ision 0x00000000 ivtv: NTSC tuner detected ivtv: Radio detected ivtv: Encoder revision: 0x02040024 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device, streamtype 0 minor 2 ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 34 ivtv: Create DMA stream 1 ivtv: Allocate DMA stream 1 ivtv: Registered v4l2 device, streamtype 2 minor 226 ivtv: Create DMA stream 2 using 121 34632 byte buffers 0 kbytes total ivtv: Allocate DMA stream 2 using 121 34632 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 26 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 66 ivtv: Create stream 4 ivtv: Allocate stream 4 ivtv: Setting Tuner 57 tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #2 cx25840: decoder set input (6) cx25840: Tuner Input cx25840: set audio: 0x01 ivtv: Switching standard to NTSC. cx25840: decoder set norm NTSC cx25840: set audio: 0x01 ivtv: Initialized WinTV PVR 150, card #2 ivtv: ==================== END INIT IVTV ==================== --- Eric Schwartz <[EMAIL PROTECTED]> wrote: > > Yeah, I'm using ivtv 0.3.3k, and removed the > stock kernel > > tuner,tveeprom,msp* modules so only the ivtv > modules were used. > > I have the same problem, and (AFAICT) the exact same > card-- rev D492, > tuner type 57. I've tried 0.3.3[kpx], 0.3.4b, > various 0.3.2 versions, > and I still get the pulsing static. > > For comparison's sake, I'm including the dmesg > result from the latest > attempt I made with 0.3.3x. I think it's identical > to yours, except for > the ivtv version: > > ivtv: ==================== START INIT IVTV > ==================== > ivtv: version 0.3.3 (x) loading > ivtv: Linux version: 2.6.11.8 preempt 686 gcc-4.0 > ivtv: In case of problems please include the debug > info > ivtv: between the START INIT IVTV and END INIT IVTV > lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 150 card > ivtv: Found an iTVC16 based chip > ACPI: PCI interrupt 0000:03:08.0[A] -> GSI 18 > (level, low) -> IRQ 18 > ivtv: XXX PCI device: 0x2570 vendor: 0x8086 > tveeprom: Hauppauge: model = 23552, rev = D492, > serial# = 7894295 > tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, > type = 57) > tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = > 0x00001000) > tveeprom: audio_processor = MSP3410D (type = 5) > ivtv: i2c attach [client=tveeprom[50],ok] > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c > driver #0 > ivtv: i2c attach [client=(tuner unset),ok] > cx25840: starting probe for adapter ivtv i2c driver > #0 (0x10005) > cx25840: detecting client on address 0x88 > cx25840: writing init values > Got Info IRQ: status 0x0002, type 0x2a00: (unknown) > cx25840: FW image '/lib/modules/HcwMakoA.ROM' of > size 14264 loaded. > cx25840: FW image md5 digest: > 3a4803384f749d644ee1f1ca9dcb12fa > cx25840: FW image sha1 digest: > 2b5e6292b7391c980b93d156cf6b34178ce770f6 > cx25840: Status: cx258433 (DEVICE_ID) > ivtv: i2c attach [client=cx25840[50],ok] > ivtv: i2c attach [client=wm8775[50],ok] > ivtv: Tuner Type 57, Tuner formats 0x00001000, > Radio: yes, Model > 0x00914652, Revision 0x00000000 > ivtv: NTSC tuner detected > ivtv: Radio detected > ivtv: Encoder revision: 0x02040011 > ivtv: Configuring WinTV PVR 150 card with 5 streams > ivtv: Registered v4l2 device, streamtype 0 minor 0 > ivtv: Create DMA stream 0 using 1024 16384 byte > buffers 0 kbytes total > ivtv: Allocate DMA stream 0 using 1024 16384 byte > buffers 16777216 > kbytes total > ivtv: Registered v4l2 device, streamtype 1 minor 32 > ivtv: Create DMA stream 1 > ivtv: Allocate DMA stream 1 > ivtv: Registered v4l2 device, streamtype 2 minor 224 > ivtv: Create DMA stream 2 using 242 34632 byte > buffers 0 kbytes total > ivtv: Allocate DMA stream 2 using 242 34632 byte > buffers 8388608 kbytes > total > ivtv: Registered v4l2 device, streamtype 3 minor 24 > ivtv: Create DMA stream 3 using 455 4608 byte > buffers 0 kbytes total > ivtv: Allocate DMA stream 3 using 455 4608 byte > buffers 2097152 kbytes > total > ivtv: Registered v4l2 device, streamtype 4 minor 64 > ivtv: Create stream 4 > ivtv: Allocate stream 4 > ivtv: Setting Tuner 57 > tuner: type set to 57 (Philips FQ1236A MK4) by ivtv > i2c driver #0 > cx25840: decoder set input (6) > cx25840: Tuner Input > cx25840: set audio: 0x01 > ivtv: Switching standard to NTSC. > cx25840: decoder set norm NTSC > cx25840: set audio: 0x01 > ivtv: Initialized WinTV PVR 150, card #0 > ivtv: Autodetected WinTV PVR 150 card > ivtv: Found an iTVC16 based chip > ACPI: PCI interrupt 0000:03:09.0[A] -> GSI 19 > (level, low) -> IRQ 19 > ivtv: XXX PCI device: 0x2570 vendor: 0x8086 > ivtv: ivtv_enc_thread: pid = 7255, itv = 0xe0b27ec0 > tveeprom: Hauppauge: model = 23552, rev = D492, > serial# = 7894295 > tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, > type = 57) > tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = > 0x00001000) > tveeprom: audio_processor = MSP3410D (type = 5) > ivtv: i2c attach [client=tveeprom[50],ok] > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c > driver #1 > ivtv: i2c attach [client=(tuner unset),ok] > cx25840: starting probe for adapter ivtv i2c driver > #1 (0x10005) > cx25840: detecting client on address 0x88 > cx25840: writing init values > cx25840: FW image '/lib/modules/HcwMakoA.ROM' of > size 14264 loaded. > cx25840: FW image md5 digest: > 3a4803384f749d644ee1f1ca9dcb12fa > cx25840: FW image sha1 digest: > 2b5e6292b7391c980b93d156cf6b34178ce770f6 > cx25840: Status: cx258433 (DEVICE_ID) > ivtv: i2c attach [client=cx25840[50],ok] > ivtv: i2c attach [client=wm8775[50],ok] > ivtv: Tuner Type 57, Tuner formats 0x00001000, > Radio: yes, Model > 0x00914652, Revision 0x00000000 > ivtv: NTSC tuner detected > ivtv: Radio detected > ivtv: Encoder revision: 0x02040011 > ivtv: Configuring WinTV PVR 150 card with 5 streams > ivtv: Registered v4l2 device, streamtype 0 minor 1 > ivtv: Create DMA stream 0 using 1024 16384 byte > buffers 0 kbytes total > ivtv: Allocate DMA stream 0 using 1024 16384 byte > buffers 16777216 > kbytes total > ivtv: Registered v4l2 device, streamtype 1 minor 33 > ivtv: Create DMA stream 1 > ivtv: Allocate DMA stream 1 > ivtv: Registered v4l2 device, streamtype 2 minor 225 > ivtv: Create DMA stream 2 using 242 34632 byte > buffers 0 kbytes total > ivtv: Allocate DMA stream 2 using 242 34632 byte > buffers 8388608 kbytes > total > ivtv: Registered v4l2 device, streamtype 3 minor 25 > ivtv: Create DMA stream 3 using 455 4608 byte > buffers 0 kbytes total > ivtv: Allocate DMA stream 3 using 455 4608 byte > buffers 2097152 kbytes > total > ivtv: Registered v4l2 device, streamtype 4 minor 65 > ivtv: Create stream 4 > ivtv: Allocate stream 4 > ivtv: Setting Tuner 57 > tuner: type set to 57 (Philips FQ1236A MK4) by ivtv > i2c driver #1 > cx25840: decoder set input (6) > cx25840: Tuner Input > ivtv: ivtv_enc_thread: pid = 7353, itv = 0xe0b3bdb4 > cx25840: set audio: 0x01 > ivtv: Switching standard to NTSC. > cx25840: decoder set norm NTSC > cx25840: set audio: 0x01 > ivtv: Initialized WinTV PVR 150, card #1 > ivtv: ==================== END INIT IVTV > ==================== > > my mythtv-related entries in /etc/modprobe.d: > > alias char-major-81 videodev > alias char-major-81-0 ivtv > alias char-major-81-1 ivtv > options cx25840 no_black_magic=1 > options ivtv ivtv_debug=1 > > in /etc/modules I have: > > tveeprom > ivtv > > I'm running a stock 2.6.11.8 kernel, with all > modules that conflict with > those in ivtv removed, so that only the ivtv > versions are available to load. > > -=Eric > > > ------------------------------------------------------- > This SF.Net email is sponsored by: NEC IT Guy Games. > Get your fingers limbered up and give it your best > shot. 4 great events, 4 > opportunities to win big! Highest score wins.NEC IT > Guy Games. Play to > win an NEC 61 plasma display. Visit > http://www.necitguy.com/?r=20 > === message truncated === __________________________________ Do you Yahoo!? Read only the mail you want - Yahoo! Mail SpamGuard. http://promotions.yahoo.com/new_mail ------------------------------------------------------- This SF.Net email is sponsored by: NEC IT Guy Games. Get your fingers limbered up and give it your best shot. 4 great events, 4 opportunities to win big! Highest score wins.NEC IT Guy Games. Play to win an NEC 61 plasma display. Visit http://www.necitguy.com/?r=20 _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
