Nick Rosier wrote: > I just added another PVR150MCE (PAL) to my system but I have trouble > getting this setup to work; the detection order of the cards is: 350, > new 150, old 150. Initialisation of the 350 and new 150 works fine but > the old 150 won't initialize properly anymore: > > ivtv: i2c client addr: 0x50 not found! > ivtv: Error -19 reading Hauppauge eeprom. > ivtv: Possible causes: the tveeprom module was not loaded, or > ivtv: the eeprom kernel module was loaded before the tveeprom module. > > tveeprom module is loaded (it's used for the 2 other cards) and kernel > eeprom is not loaded so can't be that... > Seeing as it's my old card which worked fine before, I doubt it's a HW > problem. > Anyone got any ideas?
Did you try just moving the cards around? Sometimes motherboards only have a certain number of pci slots that can be busmaster. Maybe you've got too many cards in that board now. --Brian Jackson <snip> ------------------------------------------------------- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
