Just to make sure, I removed the 350 and both the 150's get initialized perfectly; I think it's got something to do with the saa7127 which locks the i2c-bus. So it's finding the correct settings so it won't interfere.
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.4 (p) loading ivtv: Linux version: 2.6.11-gentoo-r8 preempt K8 4KSTACKS gcc-3.4 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x00e1 vendor: 0x10de tveeprom: Hauppauge: model = 26559, rev = C260, serial# = 7627086 tveeprom: tuner = LG S001D MK3 (idx = 60, type = 58) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[50],ok] ivtv: Tuner Type 58, Tuner formats 0x00400e17, Radio: yes, Model 0x008d2590, Revision 0x00000001 ivtv: Radio detected tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) cx25840: detecting client on address 0x88 cx25840: writing init values SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) SCSI device sda: drive cache: write back SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) SCSI device sda: drive cache: write back sda: sda1 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 cx25840: Status: cx258433 (DEVICE_ID) ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach [client=tda9887,ok] ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 2 using 60 34632 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Create stream 4 ivtv: Setting Tuner 58 cx25840: decoder set input (6) cx25840: Tuner Input ivtv: Switching standard to PAL. ivtv: ivtv_enc_thread: pid = 6501, itv = 0xe09a0ee0 ivtv: ivtv_enc_vbi_thread: pid = 6502, itv = 0xe09a0ee0 cx25840: decoder set norm PAL ivtv: Initialized WinTV PVR 150, card #0 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI interrupt 0000:02:0b.0[A] -> GSI 19 (level, low) -> IRQ 19 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x00e1 vendor: 0x10de tveeprom: Hauppauge: model = 26559, rev = C260, serial# = 7931265 tveeprom: tuner = LG S001D MK3 (idx = 60, type = 58) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[50],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach [client=(tuner unset),ok] cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) cx25840: detecting client on address 0x88 cx25840: writing init values cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 cx25840: Status: cx258433 (DEVICE_ID) ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach [client=tda9887,ok] ivtv: Tuner Type 58, Tuner formats 0x00400e17, Radio: yes, Model 0x008d2590, Revision 0x00000001 ivtv: Radio detected ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device, streamtype 0 minor 1 ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 33 ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 225 ivtv: Create DMA stream 2 using 60 34632 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 25 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 65 ivtv: Create stream 4 ivtv: Setting Tuner 58 cx25840: decoder set input (6) cx25840: Tuner Input ivtv: Switching standard to PAL. cx25840: decoder set norm PAL ivtv: Initialized WinTV PVR 150, card #1 ivtv: ==================== END INIT IVTV ==================== ------------------------------------------------------- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_ids93&alloc_id281&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
