On 5/14/05, Nick Rosier <[EMAIL PROTECTED]> wrote: > On 5/14/05, mrwester <[EMAIL PROTECTED]> wrote: > > For starters, I'd add another line to modprobe.conf: > > > > alias char-major-81-2 ivtv > > > > and I'd add the line > > > > options cx25840 i2c_enable=1,1 > > > > for a pvr-500 in the same box as a 350, you don't pass cx25840 > > i2c_enable options to the 350... > > > > Should be the same as getting a 350 and a 500 to work... > > ok, got it like this right now but still no luck. played with > different settings for i2c_enable for both saa7127 and cx25840 but to > no luck. > > alias char-major-81 videodev > alias char-major-81-0 ivtv > alias char-major-81-1 ivtv > alias char-major-81-2 ivtv > alias char-major-61 lirc_i2c > > options saa7127 i2c_enable=1,-1,-1 > options cx25840 i2c_enable=1,1 > options wm8775 debug=0 > options tuner pal=G debug=0 > options ivtv ivtv_std=2,2,2 tda9887=0,0,0 ivtv_debug=1 > options tda9887 pal=G debug=0 > install ivtv /sbin/modprobe --ignore-install ivtv ; /sbin/modprobe ivtv-fb > > I have no clue how to fix this. > > N. > Just to confirm... You want to do a cold reboot, letting sit for a couple of minutes before restarting. At least the PVR-500 could hold settings for a little while.
for my ntsc setup, 350 and 500 I was using: >alias char-major-81 videodev > alias char-major-81-0 ivtv > alias char-major-81-1 ivtv > alias char-major-81-2 ivtv > alias char-major-61 lirc_i2c > options cx25840 i2c_enable=1,1 no_black_magic=1 > options saa7127 i2c_enable=1,-1,-1 > options ivtv ivtv_debug=1 tda9887=0,0,0 > install ivtv /sbin/modprobe --ignore-install ivtv ; /sbin/modprobe ivtv-fb > ------------------------------------------------------- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_ids93&alloc_id281&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
