Fredrik, just noticed that you don't seem to be loading HcwMakoA.ROM. This is the initialization of my 150MCE:
May 19 13:29:53 [kernel] ivtv: Autodetected WinTV PVR 150 card May 19 13:29:53 [kernel] ivtv: Found an iTVC16 based chip May 19 13:29:53 [kernel] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 May 19 13:29:53 [kernel] ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 May 19 13:29:53 [kernel] ivtv: Unreasonably low latency timer, setting to 64 (was 32) May 19 13:29:53 [kernel] ivtv: XXX PCI device: 0x00e1 vendor: 0x10de May 19 13:29:53 [kernel] tveeprom: Hauppauge: model = 26559, rev = C260, serial# = 7931265 May 19 13:29:53 [kernel] tveeprom: tuner = LG S001D MK3 (idx = 60, type = 58) May 19 13:29:53 [kernel] tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x0 0400e17) May 19 13:29:53 [kernel] tveeprom: audio_processor = MSP3410D (type = 5) May 19 13:29:53 [kernel] ivtv: i2c attach [client=tveeprom[50],ok] May 19 13:29:53 [kernel] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 May 19 13:29:53 [kernel] ivtv: i2c attach [client=(tuner unset),ok] May 19 13:29:53 [kernel] saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) May 19 13:29:53 [kernel] saa7127: detecting saa7127 client on address 0x88 May 19 13:29:53 [kernel] saa7127: saa7127 client id: saa7127_i2c_id 1, skipped May 19 13:29:53 [kernel] tda9885/6/7: chip found @ 0x86 May 19 13:29:53 [kernel] ivtv: i2c attach [client=tda9887,ok] May 19 13:29:53 [kernel] ivtv: Tuner Type 58, Tuner formats 0x00400e17, Radio: yes, Model 0x008d2590, Revisio n 0x00000001 May 19 13:29:53 [kernel] ivtv: Radio detected May 19 13:29:53 [kernel] cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) May 19 13:29:53 [kernel] cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) May 19 13:29:53 [kernel] cx25840: detecting client on address 0x88 May 19 13:29:53 [kernel] cx25840: writing init values May 19 13:29:53 [kernel] cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. May 19 13:29:53 [kernel] cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa May 19 13:29:53 [kernel] cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 May 19 13:29:53 [kernel] cx25840: Status: cx258433 (DEVICE_ID) May 19 13:29:53 [kernel] ivtv: i2c attach [client=cx25840[50],ok] May 19 13:29:53 [kernel] ivtv: i2c attach [client=wm8775[50],ok] May 19 13:29:53 [kernel] ivtv: Encoder revision: 0x02040011 May 19 13:29:53 [kernel] ivtv: Configuring WinTV PVR 150 card with 5 streams May 19 13:29:53 [kernel] ivtv: Registered v4l2 device, streamtype 0 minor 1 May 19 13:29:53 [kernel] ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total May 19 13:29:53 [kernel] ivtv: Registered v4l2 device, streamtype 1 minor 33 May 19 13:29:53 [kernel] ivtv: Registered v4l2 device, streamtype 3 minor 25 May 19 13:29:53 [kernel] ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total May 19 13:29:53 [kernel] ivtv: Registered v4l2 device, streamtype 4 minor 65 May 19 13:29:53 [kernel] ivtv: Create stream 4 May 19 13:29:53 [kernel] ivtv: Setting Tuner 58 May 19 13:29:53 [kernel] tuner: type set to 58 (LG PAL TAPE-S001D) by ivtv i2c driver #1 May 19 13:29:53 [kernel] cx25840: decoder set input (6) May 19 13:29:53 [kernel] cx25840: Tuner Input May 19 13:29:53 [kernel] ivtv: ivtv_enc_thread: pid = 6811, itv = 0xe09bcec8 May 19 13:29:53 [kernel] ivtv: ivtv_enc_vbi_thread: pid = 6812, itv = 0xe09bcec8 May 19 13:29:53 [kernel] ivtv: Switching standard to PAL. May 19 13:29:53 [kernel] cx25840: decoder set norm PAL May 19 13:29:53 [kernel] ivtv: Initialized WinTV PVR 150, card #1 Also, try moving to Chris' recommended firmware. N. On 5/19/05, Fredrik Karlsson <[EMAIL PROTECTED]> wrote: > Hi again, > > I tried Nick's settings, but I got the same results as with the other > settings I > used for the cards in the order PVR-350 - PVR-150. > Everything seems to initialize ok: > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.3.4 (v) loading > ivtv: Linux version: 2.6.11-gentoo-r6 SMP preempt K7 4KSTACKS gcc-3.3 > ivtv: In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 350 card > ivtv: Found an iTVC15 based chip > ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 16 > ivtv: VIA PCI device: 0x3205 vendor: 0x1106 > tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7671326 > tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) > tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = > 0x74, v4l2 = 0x00400e17) > tveeprom: audio_processor = CS5331 (type = 9) > ivtv: i2c attach [client=tveeprom[50],ok] > ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model > 0x00ad2557, Revision 0x00000001 > ivtv: PAL tuner detected > ivtv: SECAM tuner detected > ivtv: Radio detected > tuner: Ignoring new-style parameters in presence of obsolete ones > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > ivtv: i2c attach [client=(tuner unset),ok] > saa7115: starting probe for adapter SMBus Via Pro adapter at 5000 (0x0) > saa7115: starting probe for adapter ISA main adapter (0x0) > saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) > saa7115: detecting saa7115 client on address 0x42 > saa7115: writing init values > ivtv: i2c attach [client=saa7115[50],ok] > saa7115: status: (1E) 0xa4, (1F) 0x90 > saa7127: Ignoring new-style parameters in presence of obsolete ones > saa7127: video encoder driver version V 0.3 loaded > saa7127: detecting saa7127 client on address 0x88 > saa7127: Selecting NTSC video Standard > saa7127: Selecting S-Video+Composite > saa7127: Turn WSS off > saa7127: Widescreen Mode 4:3 Full Format > saa7127: Selecting Normal Encoder Input > saa7127: Enable Video Output > ivtv: i2c attach [client=saa7127[50],ok] > msp34xx: ivtv version > msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, > simpler (G) no-thread mode > msp34xx: $Id$ compiled on: May 18 2005 15:23:05 > ivtv: i2c attach [client=MSP3418W-B3,ok] > ivtv: Encoder revision: 0x02050032 > ivtv: Encoder Firmware may be buggy, use version 0x02040011 > ivtv: Decoder revision: 0x02020023 > ivtv: Configuring WinTV PVR 350 card with 10 streams > ivtv: Registered v4l2 device, streamtype 0 minor 0 > ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 1 minor 32 > ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 224 > ivtv: Create DMA stream 2 using 32 65536 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 24 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 4 minor 64 > ivtv: Create stream 4 > ivtv: Registered v4l2 device, streamtype 5 minor 16 > ivtv: Create DMA stream 5 using 16 65536 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 6 minor 228 > ivtv: Create DMA stream 6 using 1024 2048 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 7 minor 232 > ivtv: Create stream 7 > ivtv: Registered v4l2 device, streamtype 8 minor 48 > ivtv: Create DMA stream 8 using 20 103680 byte buffers 0 kbytes total > ivtv: Create DMA stream 9 using 32 65536 byte buffers 0 kbytes total > ivtv: Setting Tuner 38 > tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv > i2c driver #0 > saa7115: decoder set input (4) > saa7115: now setting Composite input > ivtv: ivtv_enc_thread: pid = 29330, itv = 0xceb1f2e0 > ivtv: ivtv_enc_vbi_thread: pid = 29331, itv = 0xceb1f2e0 > ivtv: ivtv_dec_thread: pid = 29332, itv = 0xceb1f2e0 > ivtv: ivtv_dec_vbi_thread: pid = 29333, itv = 0xceb1f2e0 > ivtv: Setting audio matrix to input 3, output 1 > ivtv: Switching standard to PAL. > saa7115: decoder set norm PAL > saa7115: set audio: 0x01 > saa7127: Setting Encoder Video Standard > saa7127: Set PAL Video Mode > saa7127: Selecting PAL video Standard > ivtv: Initialized WinTV PVR 350, card #0 > ivtv: Autodetected WinTV PVR 150 card > ivtv: Found an iTVC16 based chip > ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 > ivtv: VIA PCI device: 0x3205 vendor: 0x1106 > tveeprom: Hauppauge: model = 26034, rev = C197, serial# = 7839719 > tveeprom: tuner = LG PAL (TAPE Series) (idx = 97, type = 55) > tveeprom: tuner fmt = PAL(B/G) PAL(D/K) (eeprom = 0x44, v4l2 = 0x00000e07) > tveeprom: audio_processor = MSP3400C (type = 4) > ivtv: i2c attach [client=tveeprom[50],ok] > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 > ivtv: i2c attach [client=(tuner unset),ok] > saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) > saa7127: detecting saa7127 client on address 0x88 > saa7127: Selecting NTSC video Standard > saa7127: Selecting S-Video+Composite > saa7127: Turn WSS off > saa7127: Widescreen Mode 4:3 Full Format > saa7127: Selecting Normal Encoder Input > saa7127: Enable Video Output > ivtv: i2c attach [client=saa7127[50],ok] > ivtv: Tuner Type 55, Tuner formats 0x00000e07, Radio: yes, Model > 0x008d1657, Revision 0x00000000 > ivtv: PAL tuner detected > ivtv: Radio detected > cx25840: starting probe for adapter SMBus Via Pro adapter at 5000 (0x0) > cx25840: starting probe for adapter ISA main adapter (0x0) > cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) > cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) > ivtv: i2c attach [client=wm8775[50],ok] > ivtv: Encoder revision: 0x02050032 > ivtv: Encoder Firmware may be buggy, use version 0x02040011 > ivtv: Configuring WinTV PVR 150 card with 5 streams > ivtv: Registered v4l2 device, streamtype 0 minor 1 > ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 1 minor 33 > ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 225 > ivtv: Create DMA stream 2 using 32 65536 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 25 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 4 minor 65 > ivtv: Create stream 4 > ivtv: Setting Tuner 55 > tuner: type set to 55 (LG PAL (TAPE series)) by ivtv i2c driver #1 > ivtv: Switching standard to PAL. > ivtv: Initialized WinTV PVR 150, card #1 > ivtv: ==================== END INIT IVTV ==================== > > However, my test script fails: > > mythtv root # cat ./test_ivtv > #!/bin/bash > > ptune.pl -f pal-europe -c E5 -d /dev/video0 > ptune.pl -f pal-europe -c E5 -d /dev/video1 > > dd if=/dev/video0 of=/root/out0.mpg count=8000 > dd if=/dev/video1 of=/root/out1.mpg count=8000 > > mythtv root # ./test_ivtv > Ch.E5: 175250 2804 > Ch.E5: 175250 2804 > 7999+1 records in > 7999+1 records out > dd: reading `/dev/video1': Input/output error > 0+0 records in > 0+0 records out > mythtv root # cat /etc/modules.d/ivtv > alias char-major-81 videodev > alias char-major-81-0 ivtv > alias char-major-81-1 ivtv > alias char-major-61 lirc_i2c > > options saa7127 i2c_enable=1,-1 > options wm8775 debug=0 > options tuner pal=B debug=0 > options ivtv ivtv_std=2 tda9887=0 ivtv_debug=1 > options tda9887 pal=B debug=0 > > > I tried adding a cx25840 module in there, but I could not get a > setting that worked. > Shifting the cards around solves the problem like before, but then I > still cannot get the framebuffer up on the TV out! > > Has anyone seen this before?? > > /Fredrik > > > On 5/19/05, Nick Rosier <[EMAIL PROTECTED]> wrote: > > On 5/19/05, Fredrik Karlsson <[EMAIL PROTECTED]> wrote: > > > Hi Nick, > > > > > > Thank you for your reply. I'll try it as soon as I get home. However, > > > I notice that you do not mention the cx25840 module in you setup. Is > > > it loaded automatically with the correct setting?? > > > > For me it did. At first it even caused some problems when I did put > > options there. > > > > N. > > > > > > ------------------------------------------------------- > > This SF.Net email is sponsored by Oracle Space Sweepstakes > > Want to be the first software developer in space? > > Enter now for the Oracle Space Sweepstakes! > > http://ads.osdn.com/?ad_idt12&alloc_id344&opclick > > _______________________________________________ > > ivtv-devel mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > > > > > -- > My Gentoo + PVR-350 + IVTV + MythTV blog is on > http://gentoomythtv.blogspot.com/ > > > ------------------------------------------------------- > This SF.Net email is sponsored by Oracle Space Sweepstakes > Want to be the first software developer in space? > Enter now for the Oracle Space Sweepstakes! > http://ads.osdn.com/?ad_idt12&alloc_id344&opclick > _______________________________________________ > ivtv-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > ------------------------------------------------------- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_idt12&alloc_id344&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
