On Wednesday 07 December 2005 11:46 pm, Joel Webb wrote: I am running SuSE 10.0 with the default drivers that came with suse for ivtv.
>From the documentation on the Internet, it looks like that it is supposed to be loading an image called ivtv-fw-enc.bin and ivtv-fw-dec.bin. However, the default SuSE rpms don't have these. I did find however that in the rpm it has a ivtv-api file, but that doesn't look like the driver. Below is the error that I am receiving at startup. ivtv: module not supported by Novell, setting U taint flag. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.7 (c) loading ivtv: Linux version: 2.6.13-15.7-default 586 REGPARM gcc-4.0 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 350 card ivtv: Found an iTVC15 based chip ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 i2c-algo-bit.o: (0) scl=1, sda=1 i2c-algo-bit.o: (1) scl=1, sda=0 i2c-algo-bit.o: (2) scl=1, sda=1 i2c-algo-bit.o: (3) scl=0, sda=1 i2c-algo-bit.o: (4) scl=1, sda=1 i2c-algo-bit.o: ivtv i2c driver #0 passed test. ivtv: i2c attach [client=tveeprom,ok] : chip found @ 0xc2 (ivtv i2c driver #0) ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[50],ok] saa7115: status: (1E) 0x48, (1F) 0xc0 saa7127: starting probe on adapter ivtv i2c driver #0 (0x10005) saa7127: detecting saa7127 client on address 0x88 saa7127: Selecting NTSC video Standard saa7127: Selecting S-Video+Composite saa7127: Turn WSS off saa7127: Widescreen Mode 4:3 Full Format saa7127: Selecting Normal Encoder Input saa7127: Enable Video Output ivtv: i2c attach [client=saa7127[50],ok] msp34xx: init: chip=MSP3448W-A2 +nicam +simple +simpler +radio mode=simpler ivtv: i2c attach [client=MSP3448W-A2,ok] ivtv: i2c attach [client=unset,ok] ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-1/1-0018/ir0 [ivtv i2c driver #0] msp34xxg: daemon started tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 8207478 tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3440 (type = 11) ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x00ad2598, Revision 0xc56d9e80 ivtv: NTSC tuner detected ivtv: Radio detected ivtv: requesting ivtv-fw-enc.bin from hotplug ivtv: firmware load failed ivtv: failed loading encoder firmware ivtv: Error loading firmware -3! ivtv: Error -3 initializing firmware. ivtv: Error -12 on initialization ivtv-iTVC15_16_mpg2_encoder_card: probe of 0000:00:0b.0 failed with error -12 ivtv: ==================== END INIT IVTV ==================== -- Thanks Again, Joel Webb WebbGroup Property Management webbgroup.com 336-841-7241 _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
