--- Keith C <[EMAIL PROTECTED]> wrote:
> On Jan 4, 2006, at 12:28 AM, John H. wrote: > > > ok, i got latest firmware, and it seems sound > works now, but i cannot > > change channels, and the picture is really fuzzy. > > here's the dmesg > > > > ivtv: ==================== START INIT IVTV > ==================== > > ivtv: version 0.4.1 (tagged release) loading > > ivtv: Linux version: 2.6.15 preempt K7 gcc-4.0 > > ivtv: In case of problems please include the > debug info between > > ivtv: the START INIT IVTV and END INIT IVTV > lines, along with > > ivtv: any module options, when mailing the > ivtv-users mailinglist. > > ivtv0: Autodetected WinTV PVR 150 card (cx23416 > based) > > ivtv0: i2c attach to card #0 ok [client=tveeprom, > addr=50] > > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver > #0) > > ivtv0: i2c attach to card #0 ok [client=(tuner > unset), addr=61] > > Yeah, you're going to have some serious problems, as > the tuner is not > being set for your card. > Are you absolulty sure of this? I always get this message but still get video. See this: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.1 (tagged release) loading ivtv: Linux version: 2.6.13-gentoo-r3 SMP preempt K7 gcc-3.4 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected WinTV PVR 250 card (cx23416 based) ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 19 tveeprom: ivtv version tveeprom: Hauppauge: model = 32032, rev = B326, serial# = 7109870 tveeprom: tuner = Temic 4036FY5 (idx = 26, type = 8) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio processor = MSP4448 (type = 1b) tveeprom: decoder processor = SAA7115 (type = 13) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] saa7115 0-0021: ivtv driver saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] msp3400 0-0040: ivtv driver msp3400 0-0040: chip=MSP4448G-A2 +nicam +simple +simpler +radio mode=simpler msp3400 0-0040: msp34xxg daemon started ivtv0: i2c attach to card #0 ok [client=MSP4448G-A2, addr=40] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: type set to 8 (Temic NTSC (4036 FY5)) by ivtv i2c driver #0 ivtv0: Initialized WinTV PVR 250, card #0 ivtv: ==================== END INIT IVTV ==================== John _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
