the log-status from tuner1 shows the same just not muted. ivtv1: ================= START STATUS CARD #1 ================= cx25840 3-0044: Video signal: present cx25840 3-0044: Detected format: NTSC-M cx25840 3-0044: Detected audio mode: mono cx25840 3-0044: Detected audio standard: EIAJ cx25840 3-0044: Audio muted: no cx25840 3-0044: Audio microcontroller: running cx25840 3-0044: Configured audio standard: automatic detection cx25840 3-0044: Configured audio system: EIAJ cx25840 3-0044: Specified standard: NTSC-J cx25840 3-0044: Specified input: Tuner cx25840 3-0044: Specified audio input: Tuner cx25840 3-0044: Specified audioclock freq: 48 kHz cx25840 3-0044: Preferred audio mode: stereo wm8775 3-001b: Input: default ivtv1: ================== END STATUS CARD #1 ==================
Hans Verkuil wrote: >On Thursday 30 March 2006 22:50, Berant Lemmenes wrote: > > >>Hello all, >> >>I've recently setup a mythv system with a single PVR-500, taking >>input from a Comcast basic (non-digital) cable feed. >> >>The issue I'm having is that the first tuner on the PVR-500 (tuner0) >>will automatically mute it's self when tuning to certain channels. >>Once this happens I can't un-mute the card (via ivtvctl -y mute=0 -d >>/dev/video0), and have to remove the ivtv module and reload it. >> >>I can it's not just the lower frequency channels ( which I under >>stand overlap with the FM radio range) either, it will mute when >>tuning to us-cable channel 8 (181.250 MHz), as well as channel 62 >>(451.250 MHz) but works fine on 33 (277.250 MHz). >> >>While tuner1 works great on all the channels. >> >>Visually there is not much of a difference as far as quality (other >>than some ghosting on channel 8), and the audio sounds perfect when >>listening on tuner1. >> >>#ivtvctl -d /dev/video0 --log-status while muted >>ivtv0: ================= START STATUS CARD #0 ================= >>cx25840 2-0044: Video signal: present >>cx25840 2-0044: Detected format: NTSC-M >>cx25840 2-0044: Detected audio mode: mono >>cx25840 2-0044: Detected audio standard: EIAJ >>cx25840 2-0044: Audio muted: yes >>cx25840 2-0044: Audio microcontroller: running >>cx25840 2-0044: Configured audio standard: automatic detection >>cx25840 2-0044: Configured audio system: EIAJ >>cx25840 2-0044: Specified standard: NTSC-J >> >> >^^^^^^^^^^^^^^^^^^ > >Specified standard NTSC-J? What module options did you use? That's the >Japanese NTSC standard. Or do you live in Japan? > > Hans > >_______________________________________________ >ivtv-users mailing list >[email protected] >http://ivtvdriver.org/mailman/listinfo/ivtv-users > > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
