On Sunday 08 October 2006 04:24, Timothy Brown wrote:
> Hi folks,
>
> I'm having the same problem Preet Khalsa reported on 1 Oct 2006:
> > ivtv0 warning: 1000 ms time out waiting for firmware
> > ivtv0 warning: Failed api call 0x00000082 with result 0xfffffff0
> > ivtv0 warning: ENC: Failed stopping capture -16
> > ivtv0 warning: 1000 ms time out waiting for firmware
> > ivtv0 warning: Failed api call 0x000000c6 with result 0xfffffff0
>
> Like Preet, I am on amd64 (in my case, a recent Sempron processor on
> VIA chipset). Gentoo is my distribution. I have what I believe is a
> relatively old PVR-150:
>
> driver: ivtv-0.7.0 (tagged release)
> card: Hauppauge WinTV PVR-150, bus info 0000:00:09.0, ivtv card
> #0 hardware: tuner wm8775 tveeprom
>
> I suspect but have not confirmed the problem persists in ivtv-0.7.1,
> since other users reporting this problem as seen in Google searches
> experience it there as well.
>
> Does anyone have a confirmed fix? Can I provide any debugging
> information to assist? Even when TV is viewed for the first time,
> the screen is only black (my input is S-Video).
OK, let's try to get to the bottom of this. First of all, please upgrade
to ivtv-0.7.1. Check if the problem still persists. If so, then please
do the following:
1) Try to reproduce outside of MythTV. If you can do that, then please
mail the steps you've taken to reproduce it.
2) Mail the INIT IVTV messages.
3) Run ivtvctl -D21 to enable debugging and reproduce the problem
(outside of MythTV if possible). Then mail me the debugging output.
That should give me a basis for further debugging. I have no problems
myself under 64-bit, but I'm not using MythTV. It may be a driver bug
that is triggered by MythTV.
Regards,
Hans
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
