Hans, I downloaded the trunk source but compilation failed at this command with a whole slew of errors:
g++ -I/mnt/area1/ivtv/trunk/utils/../v4l-dvb/linux/include -I/mnt/area1/ivtv/trunk/utils/../driver -D_GNU_SOURCE -O2 -Wall -g -c -o v4l2-ctl.o v4l2-ctl.cpp Hans Verkuil wrote: > On Thursday 26 October 2006 06:11, Kirk Bocek wrote: >> Well, Hans, I installed a custom 2.6.18.1 kernel and ivtv 0.8.0. >> Results were exactly the same: >> >> ivtv0 warning: ENC: REG_DMAXFER 2 wait failed >> ivtv0 warning: ENC: (0) DMA Error 0x00000001 00000001 >> ivtv0 warning: ENC: REG_DMAXFER 2 wait failed >> ivtv0 warning: ENC: (1) DMA Error 0x00000001 00000001 >> ivtv0 warning: ENC: REG_DMAXFER 2 wait failed >> ivtv0 warning: ENC: (2) DMA Error 0x00000001 00000005 >> ivtv0 warning: ENC: REG_DMAXFER 2 wait failed >> ivtv0 warning: ENC: (3) DMA Error 0x00000001 00000005 >> ivtv0 warning: ENC: REDO DMA took too many tries. >> ivtv0 warning: Error Encoder DMA >> ivtv0 warning: Couldn't find start of buffer within the first 256 >> bytes >> >> Driver load messages are below. Do you think your beta driver might >> help? > > It's certainly worth giving it a try. > > Hans > >> Kirk Bocek >> >> Hans Verkuil wrote: >>> On Wednesday 25 October 2006 19:20, Kirk Bocek wrote: >>>> Hans Verkuil wrote: >>>>> It's hard to say what the problem is. It is not something I've >>>>> seen before. My guess would be that it is either a hardware >>>>> incompatibility (what chipset does your motherboard use? Can you >>>>> test with a PVR-150/250/350 instead of a PVR-500?) or a kernel >>>>> problem. The latter can be tested by upgrading to a 2.6.15 kernel >>>>> or higher. >>>> Bummer. I really want this to work. >>>> >>>> This is a Supermicro X7DVL-E using the Intel 5000V (Blackford VS) >>>> chipset. >>>> >>>> I have another PVR-350 and PVR-500 but they're being used in my >>>> working MythTV host. >>>> >>>> I will try a more current kernel. Do you have a recommendation? Is >>>> the current 2.6.18 stable enough? I guess I need to use the >>>> matching IVTV driver too. >>> 2.6.18 should be OK. And the preferred kernel too in case some >>> debugging is needed. >>> >>> Hans >> Linux video capture interface: v2.00 >> ivtv: ==================== START INIT IVTV ==================== >> ivtv: version 0.8.0 (tagged release) loading >> ivtv: Linux version: 2.6.18.1smp-beryl01 SMP mod_unload gcc-3.4 >> ivtv: In case of problems please include the debug info between >> ivtv: the START INIT IVTV and END INIT IVTV lines, along with >> ivtv: any module options, when mailing the ivtv-users mailinglist. >> ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) >> ACPI: PCI Interrupt 0000:08:08.0[A] -> GSI 16 (level, low) -> IRQ 169 >> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >> tveeprom 1-0050: Hauppauge model 23552, rev E587, serial# 9867390 >> tveeprom 1-0050: tuner model is Samsung TCPN 2121P30A (idx 87, type >> 70) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) >> tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio >> (idx 101, type 62) >> tveeprom 1-0050: audio processor is CX25843 (idx 37) >> tveeprom 1-0050: decoder processor is CX25843 (idx 30) >> tveeprom 1-0050: has radio, has no IR remote >> ivtv0: This is the first unit of a PVR500 >> tuner 1-0060: TEA5767 detected. >> tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0) >> tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio) >> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) >> cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) >> cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) >> wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) >> ivtv0: Encoder revision: 0x02050032 >> ivtv0: Registered device video0 for encoder MPEG >> ivtv0: Registered device video32 for encoder YUV >> ivtv0: Registered device vbi0 for encoder VBI >> ivtv0: Registered device video24 for encoder PCM audio >> ivtv0: Registered device radio0 for encoder radio >> tuner 1-0061: type set to 70 (Samsung TCPN 2121P30A) >> ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 >> ivtv: ====================== NEXT CARD ====================== >> ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) >> ACPI: PCI Interrupt 0000:08:09.0[A] -> GSI 17 (level, low) -> IRQ 185 >> ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >> tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) >> cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) >> cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) >> wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) >> tveeprom 2-0050: Hauppauge model 23552, rev E587, serial# 9867390 >> tveeprom 2-0050: tuner model is Samsung TCPN 2121P30A (idx 87, type >> 70) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) >> tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio >> (idx 101, type 62) >> tveeprom 2-0050: audio processor is CX25843 (idx 37) >> tveeprom 2-0050: decoder processor is CX25843 (idx 30) >> tveeprom 2-0050: has radio, has no IR remote >> ivtv1: This is the second unit of a PVR500 >> ivtv1: Correcting tveeprom data: no radio present on second unit >> ivtv1: Encoder revision: 0x02050032 >> ivtv1: Registered device video1 for encoder MPEG >> ivtv1: Registered device video33 for encoder YUV >> ivtv1: Registered device vbi1 for encoder VBI >> ivtv1: Registered device video25 for encoder PCM audio >> tuner 2-0061: type set to 70 (Samsung TCPN 2121P30A) >> ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 >> ivtv: ==================== END INIT IVTV ==================== >> >> >> _______________________________________________ >> ivtv-users mailing list >> [email protected] >> http://ivtvdriver.org/mailman/listinfo/ivtv-users > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
