Hans Verkuil wrote:
> Please do a few tests for me: first I need the INIT IVTV messages made
> with the latest ivtv-0.8.1 from svn (I just posted a link to the
> release candidate).
>
> >From your original post I gather that there are several cases that go
> wrong. For each case make a capture and while capturing run
> v4l2-ctl --log-status -T. I need the output for each case.
>
> Anyone else who has the same problem: please give me this information as
> well! I can compare chips and status logs to see if there is a common
> factor.
>
> Thanks,
>
> Hans
>
Hans,
I am running FC5 kernel 2.6.18-1.2239.fc5 x86_64 and I just
installed the 0.8.1 test tarball posted Nov 15th.
The computer is a Athlon 64 3000+ on a MSI nForce 3 with 1GB of ram.
audio is routed from the onboard SPDIF output to a home theatre receiver
set to pro-logic II
Tv from my satellite receiver is captured by a PVR-250 via its s-video 1
and 1/8" line-in
I normally don't use the tuner, but I do have a pair of rabbit-ears
hooked up for testing, and the 1 channel I get is stereo
Using v4l2-ctl -t stereo, and input from s-video I get a duplicate mix
of the left channel (If I unplug the left, I get no sound, unplug the
right, no change)
if I set v4l2-ctl -t bilingual, then I get proper stereo recording.
This is the output of v4l2-ctl --log-status -T after v4l2-ctl -t stereo
(not working)
Tuner:
Capabilities : 62.5 kHz multi-standard stereo lang1 lang2
Frequency range : 44.0 MHz - 958.0 MHz
Signal strength : 100%
Current audio mode : stereo
Available subchannels: mono
Status Log:
ivtv0: ================= START STATUS CARD #0 =================
tveeprom 2-0050: Hauppauge model 32032, rev B310, serial# 6983495
tveeprom 2-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2)
tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 2-0050: audio processor is MSP4448 (idx 27)
tveeprom 2-0050: decoder processor is SAA7115 (idx 19)
tveeprom 2-0050: has no radio, has IR remote
tuner 2-0061: Tuner mode: analog TV
tuner 2-0061: Frequency: 187.25 MHz
tuner 2-0061: Standard: 0x0000b000
saa7115 2-0021: Audio frequency: 48000 Hz
saa7115 2-0021: Input: S-Video 0
saa7115 2-0021: Video signal: broadcast/DVD
saa7115 2-0021: Frequency: 60 Hz
saa7115 2-0021: Detected format: NTSC
msp3400 2-0040: MSP4448G-A2 rev1 = 0x0117 rev2 = 0x3042
msp3400 2-0040: Audio: volume 58950
msp3400 2-0040: Mode: External input
msp3400 2-0040: Audmode: 0x0001
msp3400 2-0040: Routing: 0x00222220 (input) 0x00000044 (output)
msp3400 2-0040: ACB: 0x0c00
ivtv0: Stream: MPEG-2 Program Stream
ivtv0: Video: 720x480, 30 fps
ivtv0: Video: MPEG-2, 4x3, Variable Bitrate, 5500000, Peak 6500000
ivtv0: Video: GOP Size 15, 2 B-Frames, GOP Closure, No 3:2 Pulldown
ivtv0: Audio: 48 kHz, Layer II, 384 kbps, Stereo, No Emphasis, No CRC
ivtv0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D
Horizontal, 0
ivtv0: Temporal Filter: Manual, 0
ivtv0: Median Filter: Off, Luma [0, 255], Chroma [0, 255]
ivtv0: ================== END STATUS CARD #0 ==================
and the output of v4l2-ctl --log-status -T after v4l2-ctl -t bilingual
(working ok)
Tuner:
Capabilities : 62.5 kHz multi-standard stereo lang1 lang2
Frequency range : 44.0 MHz - 958.0 MHz
Signal strength : 100%
Current audio mode : bilingual
Available subchannels: mono
Status Log:
ivtv0: ================= START STATUS CARD #0 =================
tveeprom 2-0050: Hauppauge model 32032, rev B310, serial# 6983495
tveeprom 2-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2)
tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 2-0050: audio processor is MSP4448 (idx 27)
tveeprom 2-0050: decoder processor is SAA7115 (idx 19)
tveeprom 2-0050: has no radio, has IR remote
tuner 2-0061: Tuner mode: analog TV
tuner 2-0061: Frequency: 187.25 MHz
tuner 2-0061: Standard: 0x0000b000
saa7115 2-0021: Audio frequency: 48000 Hz
saa7115 2-0021: Input: S-Video 0
saa7115 2-0021: Video signal: broadcast/DVD
saa7115 2-0021: Frequency: 60 Hz
saa7115 2-0021: Detected format: NTSC
msp3400 2-0040: MSP4448G-A2 rev1 = 0x0117 rev2 = 0x3042
msp3400 2-0040: Audio: volume 58950
msp3400 2-0040: Mode: External input
msp3400 2-0040: Audmode: 0x0004
msp3400 2-0040: Routing: 0x00222220 (input) 0x00000044 (output)
msp3400 2-0040: ACB: 0x0c00
ivtv0: Stream: MPEG-2 Program Stream
ivtv0: Video: 720x480, 30 fps
ivtv0: Video: MPEG-2, 4x3, Variable Bitrate, 5500000, Peak 6500000
ivtv0: Video: GOP Size 15, 2 B-Frames, GOP Closure, No 3:2 Pulldown
ivtv0: Audio: 48 kHz, Layer II, 384 kbps, Stereo, No Emphasis, No CRC
ivtv0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D
Horizontal, 0
ivtv0: Temporal Filter: Manual, 0
ivtv0: Median Filter: Off, Luma [0, 255], Chroma [0, 255]
ivtv0: ================== END STATUS CARD #0 ==================
and the output of dmesg between the init lines.
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.8.1 (development snapshot compiled on Fri 17 Nov 2006
11:56:16 PM CST) loading
ivtv: Linux version: 2.6.18-1.2239.fc5 SMP mod_unload gcc-4.1
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
GSI 22 sharing vector 0xE1 and IRQ 22
ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [APC2] -> GSI 17 (level,
low) -> IRQ 225
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
usb 3-2: device descriptor read/64, error -71
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level,
high) -> IRQ 193
PCI: Setting latency timer of device 0000:00:06.0 to 64
usb 3-2: device descriptor read/64, error -71
intel8x0_measure_ac97_clock: measured 50664 usecs
intel8x0: clocking to 46767
usb 3-2: new high speed USB device using ehci_hcd and address 4
usb 3-2: device descriptor read/64, error -71
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
usb 3-2: device descriptor read/64, error -71
tveeprom 2-0050: Hauppauge model 32032, rev B310, serial# 6983495
tveeprom 2-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2)
tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 2-0050: audio processor is MSP4448 (idx 27)
tveeprom 2-0050: decoder processor is SAA7115 (idx 19)
tveeprom 2-0050: has no radio, has IR remote
ivtv0: Autodetected Hauppauge WinTV PVR-250
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
usb 3-2: new high speed USB device using ehci_hcd and address 5
saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
msp3400 2-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)
msp3400 2-0040: MSP4448G-A2 supports radio, mode is autodetect and
autoselect
ivtv0: Encoder revision: 0x02050032
ivtv0: Registered device video0 for encoder MPEG
ivtv0: Registered device video32 for encoder YUV
ivtv0: Registered device vbi0 for encoder VBI
ivtv0: Registered device video24 for encoder PCM audio
tuner 2-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles))
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc00006c239f]
usb 3-2: device not accepting address 5, error -71
usb 3-2: new high speed USB device using ehci_hcd and address 6
ivtv0: Initialized Hauppauge WinTV PVR-250, card #0
ivtv: ==================== END INIT IVTV ====================
Thanks for looking into this.
Richard Woelk
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
