Andrew Berry wrote: > Hi all, > > I recently upgraded my mythtv box and had to switch from Ubuntu's -386 > kernel to -generic kernel. Now, I only get a solid black mpg file when > I cat /dev/video0. I've upgraded to 0.7.3 with no effect. There is a > line about the video input being 'bad' in ivtv --log, but I can't find > any docs on what that means exactly or any suggestions on how to fix > it. Also, it shows that the input is set to composite 4 even though > I've explicitly set it to the tuner with 'ivtvctl -p 0'. None of the > other inputs seem to work either. So here come the stats! > > Thanks, > --Andrew > > Installed following these instructions: > https://help.ubuntu.com/community/Install_IVTV_Edgy > > The output of dmesg | grep ivtv: > [17181533.444000] ivtv: ==================== START INIT IVTV > ==================== > [17181533.444000] ivtv: version 0.7.3 (tagged release) loading > [17181533.444000] ivtv: Linux version: 2.6.17-10-generic SMP > mod_unload 586 REGPARM gcc-4.1 > [17181533.444000] ivtv: In case of problems please include the debug > info between > [17181533.444000] ivtv: the START INIT IVTV and END INIT IVTV lines, > along with > [17181533.444000] ivtv: any module options, when mailing the > ivtv-users mailinglist. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Did you read this?
> [17181533.444000] ivtv0: Autodetected Hauppauge WinTV PVR-350 card > (cx23415 based) > [17181533.668000] saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c > driver #0) > [17181533.812000] saa7127 2-0044: saa7127 found @ 0x88 (ivtv i2c > driver #0) > [17181534.544000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 > bytes) > [17181534.560000] ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 > bytes) > [17181534.784000] ivtv0: Encoder revision: 0x02050032 > [17181534.792000] ivtv0: Decoder revision: 0x02020023 > [17181534.792000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 > buffers (4096KB total) > [17181534.792000] ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 > buffers (2048KB total) > [17181534.792000] ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 > buffers (2048KB total) > [17181534.792000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x > 4608 buffers (2048KB total) > [17181534.792000] ivtv0: Create encoder radio stream > [17181534.792000] ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 > buffers (1024KB total) > [17181534.792000] ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 > buffers (1024KB total) > [17181534.796000] ivtv0: Create decoder VOUT stream > [17181534.796000] ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 > buffers (1024KB total) > [17181534.864000] ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 > bytes) > [17181534.972000] ivtv0: i2c hardware 0x00000008 not found for command > 0xc008561c! > [17181534.976000] ivtv0: i2c hardware 0x00000008 not found for command > 0x4008646d! > [17181534.976000] ivtv0: i2c hardware 0x00000008 not found for command > 0xc008561c! > [17181534.984000] ivtv0: i2c hardware 0x00000008 not found for command > 0xc008561c! > [17181534.984000] ivtv0: i2c hardware 0x00000008 not found for command > 0xc008561c! > [17181534.984000] ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 > [17181534.984000] ivtv: ==================== END INIT IVTV > ==================== > I am missing in the above: - eeprom read-out messages, - tuner messages - .... Can you send out complete init messages? Not just those you send out here? _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
