Andrew Berry wrote: > Sorry, I didn't realize that there were lines not labelled as 'ivtv'.
You are missing at least one module: Conexant CX2341x MPEG encoders (CONFIG_VIDEO_CX2341X) And possibly also the msp3400 (CONFIG_VIDEO_MSP3400). Greets Sander > [17181533.444000] ivtv: ==================== START INIT IVTV > ==================== > [17181533.444000] ivtv: version 0.7.3 (tagged release) loading > [17181533.444000] ivtv: Linux version: 2.6.17-10-generic SMP mod_unload > 586 REGPARM gcc-4.1 > [17181533.444000] ivtv: In case of problems please include the debug > info between > [17181533.444000] ivtv: the START INIT IVTV and END INIT IVTV lines, > along with > [17181533.444000] ivtv: any module options, when mailing the ivtv-users > mailinglist. > [17181533.444000] ivtv0: Autodetected Hauppauge WinTV PVR-350 card > (cx23415 based) > [17181533.448000] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> > GSI 17 (level, low) -> IRQ 58 > [17181533.668000] saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) > [17181533.812000] saa7127 2-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) > [17181533.828000] lirc_i2c: chip found @ 0x18 (Hauppauge IR) > [17181533.828000] lirc_dev: lirc_register_plugin: sample_rate: 10 > [17181533.908000] tveeprom 2-0050: Hauppauge model 48132, rev J323, > serial# 7012185 > [17181533.908000] tveeprom 2-0050: tuner model is Philips FM1236 (idx > 23, type 2) > [17181533.908000] tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) > [17181533.908000] tveeprom 2-0050: audio processor is MSP4448 (idx 27) > [17181533.908000] tveeprom 2-0050: decoder processor is SAA7115 (idx 19) > [17181533.908000] tveeprom 2-0050: has radio, has IR remote > [17181534.544000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > [17181534.560000] ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) > [17181534.784000] ivtv0: Encoder revision: 0x02050032 > [17181534.792000] ivtv0: Decoder revision: 0x02020023 > [17181534.792000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 > buffers (4096KB total) > [17181534.792000] ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 > buffers (2048KB total) > [17181534.792000] ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 > buffers (2048KB total) > [17181534.792000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x > 4608 buffers (2048KB total) > [17181534.792000] ivtv0: Create encoder radio stream > [17181534.792000] ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 > buffers (1024KB total) > [17181534.792000] ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 > buffers (1024KB total) > [17181534.796000] ivtv0: Create decoder VOUT stream > [17181534.796000] ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 > buffers (1024KB total) > [17181534.864000] ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 > bytes) > [17181534.972000] ivtv0: i2c hardware 0x00000008 not found for command > 0xc008561c! > [17181534.976000] ivtv0: i2c hardware 0x00000008 not found for command > 0x4008646d! > [17181534.976000] ivtv0: i2c hardware 0x00000008 not found for command > 0xc008561c! > [17181534.984000] ivtv0: i2c hardware 0x00000008 not found for command > 0xc008561c! > [17181534.984000] ivtv0: i2c hardware 0x00000008 not found for command > 0xc008561c! > [17181534.984000] ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 > [17181534.984000] ivtv: ==================== END INIT IVTV > =================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
