On 6-Feb-07, at 5:28 PM, Mythtv account wrote:
I see two ways of testing: 1/ for test purposes remove the other TV card, install ivtv completely (including its modules) and see whether it works
I only have one TV card in my box.
2/ change to kernel 2.6.19.2 with ivtv 0.9.x and test there. At htat pointall supporting modules are in-kernel.
Just finished setting up 2.6.19.3. I still have the same issues unfortunately. Here is what I get when ivtv loads up:
[EMAIL PROTECTED]:~$ lsmod Module Size Used by nls_cp437 7040 1 isofs 38332 1 ext3 144264 1 jbd 63400 1 ext3 mbcache 10500 1 ext3 ipv6 269984 82 it87 25516 0 hwmon_vid 4352 1 it87 eeprom 8720 0 i2c_isa 6656 1 it87 cx24110 9604 0 msp3400 32928 0 saa7115 16912 0 tuner 63528 0 af_packet 25096 2 snd_intel8x0 35740 0 snd_ac97_codec 101024 1 snd_intel8x0 snd_ac97_bus 3584 1 snd_ac97_codec nvidia 6830964 32 ivtv 185360 0 snd_pcm_oss 47488 0 snd_mixer_oss 18560 1 snd_pcm_oss i2c_algo_bit 9608 1 ivtv cx2341x 13316 1 ivtv tveeprom 16272 1 ivtv psmouse 41480 0 agpgart 35144 1 nvidia i2c_nforce2 8576 0 videodev 27392 1 ivtv v4l1_compat 15364 2 ivtv,videodev snd_pcm 85252 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss serio_raw 8580 0 floppy 61988 0 snd_timer 25220 1 snd_pcm ata_generic 8580 0snd 58628 6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 9440 1 sndv4l2_common 24704 6 msp3400,saa7115,tuner,ivtv,cx2341x,videodev i2c_core 24192 12 it87,eeprom,i2c_isa,cx24110,msp3400,saa7115,tuner,nvidia,ivtv,i2c_algo_b it,tveeprom,i2c_nforce2
parport_pc 37924 0 parport 39624 1 parport_pc shpchp 40608 0 pci_hotplug 35008 1 shpchp snd_page_alloc 11656 2 snd_intel8x0,snd_pcm pcspkr 4480 0 evdev 11776 0 reiserfs 261632 2 usbhid 44896 1 raid456 126224 1 xor 17672 1 raid456 raid10 27264 0 raid1 26880 2 raid0 10112 0 linear 7808 0 md_mod 84628 9 raid456,raid10,raid1,raid0,linear dm_mod 63896 43 forcedeth 46724 0 ehci_hcd 34568 0 ohci_hcd 22916 0 usbcore 144004 5 usbhid,ehci_hcd,ohci_hcd ide_generic 2432 0 [permanent] ide_cd 42656 1 cdrom 39200 1 ide_cd generic 6660 0 [permanent] amd74xx 15772 0 [permanent] thermal 15752 0 processor 32840 1 thermal fan 6020 0 sd_mod 23168 6 sg 37916 0 sata_nv 13060 12 sata_sil 13192 6 libata 113172 3 ata_generic,sata_nv,sata_sil scsi_mod 144908 3 sd_mod,sg,libata[ 22.008000] ivtv: ==================== START INIT IVTV ====================
[ 22.008000] ivtv: version 0.9.1 (tagged release) loading[ 22.008000] ivtv: Linux version: 2.6.19.3-custom SMP mod_unload 586 REGPARM [ 22.008000] ivtv: In case of problems please include the debug info between [ 22.008000] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [ 22.008000] ivtv: any module options, when mailing the ivtv-users mailinglist.
[ 22.008000] ivtv0: Autodetected Hauppauge card (cx23415 based) [ 22.012000] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17[ 22.012000] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 21
[ 22.176000] nvidia: module license 'NVIDIA' taints kernel. [ 22.672000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) [ 22.700000] ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) [ 22.840000] NET: Registered protocol family 17[ 22.960000] tveeprom 2-0050: Hauppauge model 48132, rev J323, serial# 7012185 [ 22.960000] tveeprom 2-0050: tuner model is Philips FM1236 (idx 23, type 2)
[ 22.960000] tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) [ 22.960000] tveeprom 2-0050: audio processor is MSP4448 (idx 27) [ 22.960000] tveeprom 2-0050: decoder processor is SAA7115 (idx 19) [ 22.960000] tveeprom 2-0050: has radio, has IR remote [ 22.960000] ivtv0: Autodetected Hauppauge WinTV PVR-350[ 23.052000] saa7115 2-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
[ 23.244000] i2c_adapter i2c-2: Client creation failed at 0x44 (-1) [ 23.268000] ivtv0: Encoder revision: 0x02050032 [ 23.276000] ivtv0: Decoder revision: 0x02020023 [ 23.276000] ivtv0: Registered device video0 for encoder MPEG [ 23.280000] ivtv0: Registered device video32 for encoder YUV [ 23.280000] ivtv0: Registered device vbi0 for encoder VBI [ 23.280000] ivtv0: Registered device video24 for encoder PCM audio [ 23.280000] ivtv0: Registered device radio0 for encoder radio [ 23.280000] ivtv0: Registered device video16 for decoder MPEG [ 23.280000] ivtv0: Registered device vbi8 for decoder VBI [ 23.280000] ivtv0: Registered device vbi16 for decoder VOUT [ 23.280000] ivtv0: Registered device video48 for decoder YUV[ 23.364000] ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) [ 23.472000] ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0xc008561c! [ 23.476000] ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0x4008646d! [ 23.576000] ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0xc008561c! [ 23.648000] ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0xc008561c! [ 23.748000] ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0xc008561c!
[ 23.748000] ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 [ 23.752000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22[ 23.752000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 18
[ 23.752000] PCI: Setting latency timer of device 0000:00:04.0 to 64[ 23.752000] ivtv: ==================== END INIT IVTV ====================
PGP.sig
Description: This is a digitally signed message part
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
