Sander Sweers wrote: > On 5/11/07, Stefan Langeland <[EMAIL PROTECTED]> wrote: >> I finally made it. There is a problem in the current 0.10.1 version of ivtv. >> Please find >> attached a >> patch for 0.10.1. >> >> In details: I just added in the file ivtv-driver.c one more line with my >> model-id 30039. >> Someone should open a bug that he didn't "respect" my selection with >> cardtype=1 but >> tried to use the default value. > > Cool, Can you post the latest INIT IVTV with forced cardtype? Sure, just to make it clear: With the patched I didn't need to specify a cardtype again. With the specified cardtype=1 (without patch):
[ 1507.568787] ivtv0: Removed Hauppauge WinTV PVR-150, card #0 >> [ 1590.329400] ivtv: ==================== START INIT IVTV >> ==================== >> [ 1590.329408] ivtv: version 0.10.1 (tagged release) loading >> [ 1590.329410] ivtv: Linux version: 2.6.20-15-generic SMP mod_unload 586 >> [ 1590.329413] ivtv: In case of problems please include the debug info >> between >> [ 1590.329415] ivtv: the START INIT IVTV and END INIT IVTV lines, along >> with >> [ 1590.329417] ivtv: any module options, when mailing the ivtv-users >> mailinglist. >> [ 1590.330536] ivtv0: User specified Hauppauge WinTV PVR-250 card (detected >> cx23416 based chip) >> [ 1590.330761] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 17 (level, low) >> -> IRQ 18 >> [ 1590.974489] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >> [ 1591.189298] ivtv0: Encoder revision: 0x02050032 >> [ 1591.189304] ivtv0: Recommended firmware version is 0x02060039. >> [ 1591.259071] tveeprom 0-0050: Hauppauge model 30039, rev B157, serial# >> 6817533 >> [ 1591.259080] tveeprom 0-0050: tuner model is Philips FM1216 ME MK3 (idx >> 57, type 38) >> [ 1591.259084] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') >> PAL(D/D1/K) (eeprom 0x74) >> [ 1591.259088] tveeprom 0-0050: audio processor is MSP4418 (idx 25) >> [ 1591.259091] tveeprom 0-0050: decoder processor is SAA7115 (idx 19) >> [ 1591.259094] tveeprom 0-0050: has radio, has no IR receiver, has no IR >> transmitter >> [ 1591.259098] ivtv0: Unknown model 30039, defaulting to PVR-150 >> [ 1591.259103] ivtv0: Autodetected Hauppauge WinTV PVR-150 >> [ 1591.273115] tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) >> [ 1591.273168] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) >> [ 1591.277480] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) >> [ 1591.324361] ivtv0: Registered device video0 for encoder MPEG (4 MB) >> [ 1591.324726] ivtv0: Registered device video32 for encoder YUV (2 MB) >> [ 1591.325064] ivtv0: Registered device vbi0 for encoder VBI (1 MB) >> [ 1591.325354] ivtv0: Registered device video24 for encoder PCM audio (1 MB) >> [ 1591.325756] ivtv0: Registered device radio0 for encoder radio >> [ 1591.325868] tuner 0-0061: type set to 38 (Philips PAL/SECAM multi >> (FM1216ME MK3)) >> [ 1591.325978] ivtv0: i2c hardware 0x00000001 (cx2584x) not found for >> command 0xc008561c! >> [ 1591.325985] ivtv0: i2c addr 0x44 not found for command 0x4008646f! >> [ 1591.325990] ivtv0: i2c hardware 0x00000020 (wm8775) not found for >> command 0x4008646d! >> [ 1591.325993] ivtv0: i2c hardware 0x00000001 (cx2584x) not found for >> command 0x4008646d! >> [ 1591.440825] ivtv0: i2c hardware 0x00000001 (cx2584x) not found for >> command 0xc008561c! >> [ 1591.443804] ivtv0: i2c hardware 0x00000001 (cx2584x) not found for >> command 0xc008561c! >> [ 1591.580714] ivtv0: i2c hardware 0x00000001 (cx2584x) not found for >> command 0xc008561c! >> [ 1591.580725] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 >> [ 1591.580955] ivtv: ==================== END INIT IVTV >> ==================== Yours, Stefan _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
