Hello, i am using ivtv driver with my pvr150 happily for a couple of month now with different versions of ivtv and kernels from 2.6.15 to 2.20 on my gentoo box. Recently I did an upgrade to kernel 2.6.22-r1 which according to ivtvdriver.org and also this discussion group should have the ivtv drivers included. I loaded what i think is the correct driver (ivtv itself does not seem to exist in /lib/modules/2.6.22), anyhow i do not get a /dev/video0 device or see something about ivtv in dmesg
This is my loaded modules list: Module Size Used by cx8802 14084 0 cx2341x 10500 0 cx8800 26240 0 cx88xx 57828 2 cx8802,cx8800 ir_common 29764 1 cx88xx video_buf 18692 3 cx8802,cx8800,cx88xx tveeprom 13904 1 cx88xx btcx_risc 4104 3 cx8802,cx8800,cx88xx w83627ehf 16272 0 hwmon 2692 1 w83627ehf i2c_isa 3456 1 w83627ehf eeprom 5712 0 nvidia 6827956 32 i2c_i801 7440 0 Has anybody already some experience in using the new kernel driver? What do i need to load and is there something i am missing in my kernel configuration (I would like to use the new 2.6.22 since lm_sensors will support my ASUS P5B mainboard which does not work with 2.6.20 which is now my working setup for ivtv)? Regards, Jan
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
